Cat C280 Marine Auxiliary Engines
Auxiliary Engines
-
Specification Summary
- Power Range 1730 - 5420 bkW
- Frequency 50 / 60
- Emissions U.S. EPA Tier 4
- Minimum Rating 1730 bkW
- Download Brochure
Power Rating
| Power Range | 1730 - 5420 bkW |
| Minimum Rating | 1730 bkW |
| Maximum Rating | 5420 bkW |
Generator Set Specifications
| Frequency | 50 / 60 |
Engine Specifications
| Emissions | U.S. EPA Tier 4 |
| Aspiration | Turbocharged - Aspirator |
| Bore | 280 mm |
| Stroke | 300 mm |
| Configuration | In-Line 6, V 8, V 12, V 16, 4-Stroke-Cycle Diesel |
Dimensions & Weights
| Maximum Width | 1741 mm |
| Minimum Height | 2733 mm |
| Minimum Dry Weight | 15680 kg |
| Maximum Height | 3550 mm |
| Minimum Width | 1704 mm |
| Minimum Length | 3691 mm |
| Maximum Length | 5007 mm |
| Maximum Dry Weight | 28500 kg |
AIR INLET SYSTEM
R INLET SYSTEM Aftercooler, fresh water, corrosion resistant coated (air side) Air inlet shutoff Breather, crankcase, top-mounted Turbocharger, rear-mounted, engine oil lubricated
R INLET SYSTEM Aftercooler, fresh water, corrosion resistant coated (air side) Air inlet shutoff Breather, crankcase, top-mounted Turbocharger, rear-mounted, engine oil lubricated
CONTROL SYSTEM
Single Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)
COOLING SYSTEM
Engine coolant water drains
EXHAUST SYSTEM
Dry, gas tight, exhaust manifold
Dry, gas tight, exhaust manifold
FUEL SYSTEM
Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C) Fuel transfer pump (mounted on left hand side) Duplex fuel filters Electronically Controlled Unit Injectors
LUBE SYSTEM
Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the
GENERAL
Paint, Caterpillar yellow Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water
SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
Service literature. Included standard with each engine are two (2) complete sets of service literature listed below: 1. Custom parts book CD (serial number specific) 2. Service manual, which includes: Operation & Maintenance, Specifications, Systems Op
AVAILABLE ON-SITE POWER
AIR INLET SYSTEM
Air Cleaners
COOLING SYSTEM
Jacket Water Heaters
Heat Recovery System
Heat Recovery Thermostats
Cooling System Connection Groups
De-Aerator
Jacket Water Heaters
Heat Recovery System
Heat Recovery Thermostats
Cooling System Connection Groups
De-Aerator
CONTROL SYSTEM
Load Sharing module
Direct Rack Module
EXHAUST SYSTEM
Outlet Expander
Flexible Exhaust Fittings
Weld Flange - Optional
FUEL SYSTEM
Fuel Priming Pump
Duplex Primary Fuel Strainer
Fuel System Connections
Fuel Priming Pump
Duplex Primary Fuel Strainer
Fuel System Connections
LUBE SYSTEM
Oil Pan Drain Valve
Prelubrication Connections
Lube Oil Heater
MOUNTING SYSTEM
Vibration Isolators
Vibration Isolators
MARINE SOCIETY REQUIREMENTS
Spray shielding
Spray shielding
PROTECTION SYSTEM
PLC Monitoring System Options
ECP Relay System Options
ECP Mechanical Gauge Instrument Panel
Turbocharger Speed Sensor
Cylinder Pressure Relief Valve
Oil Mist Detector
Protection System Components
Magnetic Pickup
SPARE PART KITS
Intake and Air System
Basic Engine
Cylinder Head
Fuel System
Cooling System
Instrumentation
Cylinder Valve Kits
STARTING SYSTEM
ENGINE TESTING
Basic System Testing
Special Witness Test
Torsional Vibration Analysis
Basic System Testing
Special Witness Test
Torsional Vibration Analysis
SERVICE TOOLS / SHIPPING PROTECTION / FACTORY SUPPORT
Commissioning
Service Tools
Factory Packaging
Shipping Protection-Shrink Wrap or Tarp
Shipping Protection-Export Boxing
AID Emblem
Storage Preservation
30 Mins