Maximum Power | 30 kW |
Maximum Torque | 112 Nm @ 1800 rpm |
Rated Speed | 2200-3000 rpm |
Minimum Power | 20.7 kW |
Emissions | U.S. EPA Tier 4 Interim Equivalent |
Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
Bore | 84 mm |
Stroke | 90 mm |
Displacement | 1.496 l |
Compression Ratio | 22.5:1 |
Aspiration | Naturally Aspirated (NA) or Turbocharged (T) |
Combustion System | Indirect Injection |
Rotation from Flywheel End | Counterclockwise |
Aftertreatment | - |
Length | 572 mm |
Width | 512 mm |
Height | 643 mm |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 157 kg |
Inlet manifold with choice of inlets.
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Tier 4 Final: Alternator 12V 85 amp
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Naturally Aspirated: SAE No. 7 1/2 flywheel
Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel
Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Alternative oil fillers
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request