Descriptions
Manufacturer:
Caterpillar
Product Family:
Power Modules (obs)
Model:
3516
Year:
2007
SMU/Hrs:
22964
Location:
UAE
Serial number:
ZAP00615
Cat® C1.6 Diesel Engine
-
Specification Summary
- Minimum Power24.6 bkW
- Maximum Power26.5 bkW
- Frequency2800 & 3000 rpm
- EmissionsU.S. EPA Tier 4 Interim Equivalent
- Engine ConfigurationInline 4, 4-Stroke-Cycle Diesel
The Cat® C1.6 Industrial Diesel Engine is offered in the following ratings: 26.5 bkW (33 & 35.5 bhp) @ 2800 & 3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim) emission standards. Industries and applications powered by C1.6 engines include: Aircraft Ground Support, Bore/Drill Rigs, Chippers & Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping and Underground Mining Equipment.
Power Rating
| Minimum Power | 24.6 bkW |
| Maximum Power | 26.5 bkW |
| Frequency | 2800 & 3000 rpm |
Emission Standards
| Emissions | U.S. EPA Tier 4 Interim Equivalent |
General
| Engine Configuration | Inline 4, 4-Stroke-Cycle Diesel |
| Bore | 77 mm (3.03 in) |
| Stroke | 81 mm (3.19 in) |
| Displacement | 1.508 L (92 in³) |
| Aspiration | Naturally Aspirated (NA) |
| Compression Ratio | 22.9:1 |
| Combustion System | Indirect Injection |
| Rotation (from flywheel end) | Counterclockwise |
| Lube System (refill) | 6.5 L (6.9 qt) |
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
| Length | 591 mm (23.3 in) |
| Width | 420 mm (16.5 in) |
| Height | 576 mm (22.7 in) |
| Weight, Net Dry (Basic Operating Engine Without Optional Attachments) | 106.8 kg (235.5 lb) |
Air Inlet System
Inlet manifold with choice of inlets.
Inlet manifold with choice of inlets.
Control System
Alternator 12 volt 40 amp
Starter motor 12 volt
Glow plug starting aid
Alternator 12 volt 40 amp
Starter motor 12 volt
Glow plug starting aid
Cooling System
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Flywheel & Flywheel Housing
SAE No. 6 1/2 flywheel
Choice of SAE No. 5 or standard backplate flywheel housing
Fuel System
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Lube System
Lube oil filter
Lube oil pressure switch
Lube oil sump
General
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request
