Industrial Diesel Engines

  • Specification Summary

  • Maximum Power 18.4 kW
  • Maximum Torque 86 Nm @ 1800 rpm
  • Rated Speed 2200/2800 rpm
  • Minimum Power 18.4 kW
product-C1.7 Tier 4 Diesel Engines - Highly Regulated
The Cat® C1.5 Industrial Diesel Engine is offered in ratings ranging from 18.4-27.6 bkW (24.7-37.0 bhp) @ 1800-3000 rpm and meet U.S. EPA Tier 4 Final emission standards. Ratings: 20.9-30.0 bkW (28.0-40.2bhp) @ 2200-3000 rpm meet EU Stage IIIA emission standards and are also available in Europe and other regions. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

Power Rating

Maximum Power 18.4 kW
Maximum Torque 86 Nm @ 1800 rpm
Rated Speed 2200/2800 rpm
Minimum Power 18.4 kW

Emission Standards

Emissions U.S. EPA Tier 4 Final

General

Engine Configuration In-Line 3
Bore 84 mm
Stroke 90 mm
Displacement 1.496 l
Compression Ratio 22.5:1
Aspiration Naturally Aspirated (NA)
Combustion System Indirect Injection
Rotation from Flywheel End Counterclockwise
Aftertreatment -

Engine Dimensions - Approximate

Length 572 mm
Width 453 mm
Height 643 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 148 kg

Air Inlet System

 Inlet manifold with choice of inlets.

Inlet manifold with choice of inlets.

Control System

 Alternator 12 volt 65 amp

 Starter motor 12 volt

 Glow plug starting aid

 Tier 4 Final: Alternator 12V 85 amp

Alternator 12 volt 65 amp

Starter motor 12 volt

Glow plug starting aid

Tier 4 Final: Alternator 12V 85 amp

Cooling System

 Belt-driven coolant pump

 Coolant temperature switch

 Choice of cooling fans

Belt-driven coolant pump

Coolant temperature switch

Choice of cooling fans

Flywheel & Flywheel Housing

 Naturally Aspirated: SAE No. 7 1/2 flywheel

 Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing

 Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel

 Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing

 EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel

 Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing

Fuel System

 Fuel injection pump

 Spin-on fuel filter

 Electronic Shut-off Solenoid (ESOS)

Fuel injection pump

Spin-on fuel filter

Electronic Shut-off Solenoid (ESOS)

Lube System

 Alternative oil fillers

 Spin-on lube oil filter

 Lube oil pressure switch

 Lube oil sump

Power Take Off (PTO)

 Provision for Power Take Off (PTO)

General

 Cast iron, engine block

 Cast iron exhaust manifold--side outlet

 Cold start capability to -20° C (-4° F)

 Gradeability 35° continuous

Tier 4 Final Aftertreatment / Clean Emissions Control Equipment)

 Diesel Particulate Filter (DPF)

 Diesel Oxidation Catalyst (DOC)

 Passive Regeneration System with Backup