Maximum Power | 13.3 kW |
Maximum Torque | 44 Nm @ 1400 rpm |
Rated Speed | 2200-3600 rpm |
Minimum Power | 8.8 kW |
Emissions | U.S. EPA Tier 4 Final, EU Stage V |
Engine Configuration | In-Line 3 |
Bore | 67 mm |
Stroke | 72 mm |
Displacement | 0.76 l |
Compression Ratio | 23.5:1 |
Aspiration | Naturally Aspirated (NA) |
Combustion System | Indirect Injection |
Rotation from Flywheel End | Counterclockwise |
Length | 480 mm |
Width | 371 mm |
Height | 528 mm |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 71 kg |
Inlet manifold with choice of inlets.
Alternator 12 volt 14 amp
Starter motor 12 volt
Glow plug starting aid
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
SAE No. 6 1/2 flywheel
Choice of SAE No. 5 or standard backplate flywheel housing
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Closed circuit breather
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request