Descriptions
Manufacturer:
Caterpillar
Product Family:
Power Modules (obs)
Model:
3516
Year:
2007
SMU/Hrs:
22964
Location:
UAE
Serial number:
ZAP00615
Cat® C1.1 Industrial Power Unit
-
Specification Summary
- Minimum Rating17.9 bkW
- Maximum Rating17.9 bkW
- Frequency3000 rpm
- EmissionsU.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel
C1.1 Industrial Power Units, with the rating: 17.9 bkW (24 bhp) @ 3000 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available for U.S. EPA Flexibility and for Europe and, depending on applicable emission standards, may be introduced in other regulated jurisdictions. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Power Rating
| Minimum Rating | 17.9 bkW |
| Maximum Rating | 17.9 bkW |
| Frequency | 3000 rpm |
Emission Standards
| Emissions | U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. |
General
| Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
| Bore | 77 mm (3.03 in) |
| Stroke | 81 mm (3.19 in) |
| Displacement | 1.131 L (69 in³) |
| Aspiration | Naturally Aspirated (NA) |
| Compression Ratio | 23:1 |
| Rotation (from flywheel end) | Counterclockwise |
| Cooling System Capacity | 5.21 L (5.5 qt) |
| Lube System (refill) | 4.9 L (5.2 qt) |
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
| Length | 778 mm (30.6 in) |
| Width | 438 mm (17.2 in) |
| Height | 730 mm (28.7 in) |
| Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) | 129 kg (284 lb) |
Air Inlet System
Inlet manifold
Control System
Alternator 12 volt 15 amp
Starter motor 12 volt
Glow plug starting aid
Cooling System
Belt-driven coolant pump
Coolant temperature switch
Mounted radiator and fan
Belt-driven coolant pump
Coolant temperature switch
Mounted radiator and fan
Flywheel and Flywheel Housing
SAE No. 6 1/2 flywheel
SAE No. 5 flywheel housing
SAE No. 6 1/2 flywheel
SAE No. 5 flywheel housing
Fuel System
Fuel injection pump
Fuel filter
Electronic Shut-off Solenoid (ESOS)
Fuel injection pump
Fuel filter
Electronic Shut-off Solenoid (ESOS)
Lube System
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Power Take Off (PTO)
Provision for timing case rear facing PTO
Provision for timing case rear facing PTO
General
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request
