Descriptions
Manufacturer:
Caterpillar
Product Family:
Power Modules (obs)
Model:
3516
Year:
2007
SMU/Hrs:
22964
Location:
UAE
Serial number:
ZAP00615
Cat® C2.2 Industrial Power Unit
Industrial Diesel Power Units
-
Specification Summary
- Minimum Power36.3 bkW
- Maximum Power45.5 bkW
- Frequency2800-3000 rpm
- EmissionsU.S. EPA Tier 4 Interim, EU Stage IIIA
- Engine ConfigurationInline 4, 4-Stroke-Cycle Diesel
The Cat® C2.2 Industrial Power Unit is offered in the following rating: 36.4 bkW (48.8 bhp) @ 2800-3000 rpm. This rating meets U.S. EPA Tier 4 Final, EU Stage IIIA emission standards. Ratings: 44.7-45.5 bkW (59.9-61.0 bhp) @ 2800-3000 rpm meet U.S. EPA Tier 4 Final, EU Stage IIIB emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Power Rating
| Minimum Power | 36.3 bkW |
| Maximum Power | 45.5 bkW |
| Frequency | 2800-3000 rpm |
Emission Standards
| Emissions | U.S. EPA Tier 4 Interim, EU Stage IIIA |
General
| Engine Configuration | Inline 4, 4-Stroke-Cycle Diesel |
| Bore | 84 mm (3.3 in) |
| Stroke | 100 mm (3.9 in) |
| Displacement | 2.216 L (135 in³) |
| Aspiration | Naturally Aspirated (NA) or Turbocharged (T) |
| Compression Ratio | 23.3:1 |
| Rotation (from flywheel end) | Counterclockwise |
| Cooling System Capacity | 6.98 L (7.4 qt) |
| Lube System (refill) | 10.6 L (11.2 qt) |
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
| Length | 946-973 mm (37.2-38.2 in) |
| Width | 513-590 mm (20.2-23.2 in) |
| Height | 854-973 mm (33.6-38.3 in) |
| Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) | 218-228 kg (480-502 lb) |
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
| Diameter | 198 mm (7.8 in) |
| Weight | 16 kg (35.3 lb) |
Air Inlet System
Inlet manifold
Control System
Alternator 12 volt 65 amp
Tier 4 Final: Alternator 12V 85 amp
Starter motor 12 volt
Glow plug starting aid
Cooling System
Belt-driven coolant pump
Coolant temperature switch
Mounted air cleaner
Mounted radiator and fan
Belt-driven coolant pump
Coolant temperature switch
Mounted air cleaner
Mounted radiator and fan
Flywheels and Flywheel Housing
SAE No. 7 1/2 flywheel
SAE No. 4 flywheel housing
Fuel System
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Lube System
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Power Take Off (PTO)
Provision for Power Take Off (PTO)
SAE A PTO drive (Tier 4 Final, Stage IV)
Provision for Power Take Off (PTO)
SAE A PTO drive (Tier 4 Final, Stage IV)
General
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request
U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
Diesel Particulate Filter (DPF) with range of outlet options
Diesel Oxidation Catalyst (DOC)
Passive regeneration system with backup
