fbpx

Industrial Diesel Power Units

  • Specification Summary

  • Minimum Power25.1 bkW
  • Maximum Power27.0 bkW
  • Frequency2800-3000 rpm
  • EmissionsU.S. EPA Tier 4 Final or EU Stage IIIA
  • Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel
The Cat® C1.5 Industrial Power Unit is offered in the following rating: 27 bkW (36 bhp) @ 2800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Rating: 24.2 bkW (32.5 bhp) @ 3000 meets EU Stage IIIA (U.S. EPA Tier 4 Interim) emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

Minimum Power 25.1 bkW
Maximum Power 27.0 bkW
Frequency 2800-3000 rpm

Emission Standards

Emissions U.S. EPA Tier 4 Final or EU Stage IIIA

General

Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
Bore 84 mm (3.3 in)
Stroke 90 mm (3.5 in)
Displacement 1.496 L (91 in³)
Aspiration Naturally Aspirated (NA)
Compression Ratio 22.5:1
Rotation (from flywheel end) Counterclockwise
Cooling System Capacity 5.98 L (6.3 qt)
Lube System (refill) 6 L (6.3 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length 820 mm (32.3 in)
Width 497 mm (19.6 in)
Height 793 mm (31.2 in)
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 175 kg (385.8 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Weight 13 kg (28.7 lb)

Air Inlet System

 Inlet manifold

Control System

 Alternator 12 volt 65 amp

 Starter motor 12 volt

 Glow plug starting aid

 Tier 4 Final: Alternator 12V 85 amp

Alternator 12 volt 65 amp

Starter motor 12 volt

Glow plug starting aid

Tier 4 Final: Alternator 12V 85 amp

Cooling System

 Belt-driven coolant pump

 Coolant temperature switch

 Mounted air cleaner

 Mounted radiator and fan

Belt-driven coolant pump

Coolant temperature switch

Mounted air cleaner

Mounted radiator and fan

Flywheel & Flywheel Housing

 Naturally Aspirated: SAE No. 7 1/2 flywheel

 Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing

Fuel System

 Fuel injection pump

 Fuel filter

 Electronic Shut-off Solenoid (ESOS)

Lube System

 Spin-on lube oil filter

 Lube oil pressure switch

 Lube oil sump

Power Take Off (PTO)

 Provision for timing case rear facing PTO

Provision for timing case rear facing PTO

General

 Cast iron, engine block

 Cast iron exhaust manifold--side outlet

 Cold start capability to -20° C (-4° F)

 Gradeability 35° continuous

 Paint: Caterpillar yellow, with optional colors available at request

Cast iron, engine block

Cast iron exhaust manifold--side outlet

Cold start capability to -20° C (-4° F)

Gradeability 35° continuous

Paint: Caterpillar yellow, with optional colors available at request

Tier 4 Final Aftertreatment / Clean Emissions Control Equipment

 Diesel Particulate Filter (DPF)

 Diesel Oxidation Catalyst (DOC)

 Passive regeneration system with backup

Array
(
    [model] => Cat<sup>®</sup>  C1.5 Industrial Power Unit
    [category] => Cat<sup>®</sup>  C1.5 Industrial Power Unit
    [url] => https://www.albahar.com/products/new/cat-power-systems/details/industrial-oem/industrial-diesel-power-units-highly-regulated/c1.5/18395494/402/18255914/18255931/
)