Cat® 3054C Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of mechanical fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment. 3054C engines, with ratings: 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm, meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for non-regulated areas.
Power Rating
Maximum Power |
97 kW |
Maximum Torque |
500 Nm @ 1400 rpm |
Rated Speed |
2200-2400 rpm |
Minimum Power |
52 kW |
Emission Standards
Emissions |
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent |
General
Engine Configuration |
Inline 4, 4-Stroke-Cycle Diesel |
Bore |
105 mm |
Stroke |
127 mm |
Displacement |
4.4 l |
Compression Ratio |
16.2:1 |
Aspiration |
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA) |
Combustion System |
Direct Injection |
Rotation from Flywheel End |
Counterclockwise |
Aftertreatment |
- |
Engine Dimensions - Approximate
Length |
663 mm |
Width |
620 mm |
Height |
810 mm |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments |
306 kg |
Air Inlet System
Inlet manifold with choice of inlets.
Inlet manifold with choice of inlets.
Control System
Alternator
Starter motor
Control Panel
Glow plug starting aid
Alternator
Starter motor
Control Panel
Glow plug starting aid
Cooling System
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix
Flywheels and Flywheel Housing
SAE No. 3 flywheel housing
Flywheel and starter rings
Fuel System
Fuel filter positions
Lube System
Lubricating oil filters and breathers
Oil filter positions
Lube oil sump
Power Take Off
SAE B Power Take Off (PTO)
General
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring
Paint: Caterpillar yellow, with optional colors available at request
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring
Paint: Caterpillar yellow, with optional colors available at request