Maximum Power | 18.4 kW |
Maximum Torque | 86 Nm @ 1300 rpm |
Rated Speed | 2200/2800 rpm |
Minimum Power | 18.4 kW |
Emissions | U.S. EPA Tier 4 Final |
Engine Configuration | In-Line 3 |
Bore | 84 mm |
Stroke | 90 mm |
Displacement | 1.496 l |
Compression Ratio | 22.5:1 |
Aspiration | Naturally Aspirated (NA) |
Combustion System | Indirect Injection |
Rotation from Flywheel End | Counterclockwise |
Aftertreatment | - |
Length | 572 mm |
Width | 453 mm |
Height | 643 mm |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 148 kg |
Inlet manifold with choice of inlets.
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Tier 4 Final: Alternator 12V 85 amp
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Naturally Aspirated: SAE No. 7 1/2 flywheel
Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel
Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Alternative oil fillers
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Provision for Power Take Off (PTO)
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Diesel Particulate Filter (DPF)
Diesel Oxidation Catalyst (DOC)
Passive Regeneration System with Backup