Cat® 3406C Fire Pump Engine
Diesel Fire Pumps
-
Specification Summary
- Maximum Power 359 kW
- Rated Speed 1750-2300 rpm
- Minimum Power 218 kW
- Emissions Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
Power Rating
| Maximum Power | 359 kW |
| Rated Speed | 1750-2300 rpm |
| Minimum Power | 218 kW |
Emission Standards
| Emissions | Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed |
General
| Engine Configuration | Inline 6, 4-Stroke-Cycle Diesel |
| Bore | 137 mm |
| Stroke | 165 mm |
| Displacement | 14.6 l |
| Compression Ratio | 14.5:1 |
| Aspiration | Turbocharged Aftercooled |
| Rotation from Flywheel End | Counterclockwise |
| Aftertreatment | - |
Engine Dimensions - Approximate
| Length | 1660 mm |
| Height | 1335 mm |
Air Inlet System
Dry or watercooled manifold and turbocharger
Charging System
Charging Alternator, 24 volt, 35 amp
Charging Alternator, 24 volt, 35 amp
Control System
Hydra-mechanical governor
Hydra-mechanical governor
Cooling System
Thermostats and housing
Jacket water pump, gear driven, centrifugal
Heat exchanger
Expansion tank
FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
Optional Radiator, not UL listed or FM approved
Thermostats and housing
Jacket water pump, gear driven, centrifugal
Heat exchanger
Expansion tank
FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
Optional Radiator, not UL listed or FM approved
Exhaust System
Exhaust manifold, water-cooled (wet) or dry
Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
Flywheels and Flywheel Housing
SAE No. 1 flywheel
SAE No. 1 flywheel housing
SAE standard rotation
Fuel System
Fuel filter, LH
Fuel transfer pump
Primary fuel filter / water separator
Fuel filter, LH
Fuel transfer pump
Primary fuel filter / water separator
Instrumentation
Instrument panel, LH
Engine oil pressure gauge
Fuel pressure gauge
Water temperature gauge
Service meter
Lube System
Crankcase breather
Oil cooler
Lube oil filter
Oil filler in valve cover and dipstick, both RH
Rear sump oil pan
Oil filler in valve cover
Dipstick
Mounting System
Supports
Supports
Power Take-Offs
Flywheel stub shaft
Protection System
Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
General
Vibration damper and guard
Lifting eyes
Paint - fire pump red, optional radiator painted black
30 Mins