3512B (50 Hz) Generator Set

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

Air Inlet

 Air Cleaner

Cooling

 Package mounted radiator (except C175)

Package mounted radiator (except C175)

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

Exhaust

 Exhaust flange outlet

Fuel

 Primary fuel filter with integral water separator

 Secondary fuel filter

 Fuel priming pump

Primary fuel filter with integral water separator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

Secondary fuel filter

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

Fuel priming pump

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

Generator

 Matched to the performance and output characteristics of Cat engines

 IP23 Protection

Power Termination

 Bus Bar

Bus Bar

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

 Aingle element canister type air cleaner with service indicator

 Air Cleaner

 Package mounted radiator (except C175)

 Emergency stop button

 Programmable protective relaying functions:

 Over / under voltage (27 / 59)

 kVAr (per phase, average & percent)

 kVA (per phase, average & percent)

 Engine cool-down timer

 Generator mounted - rear facing

 Overcurrent (50 / 51)

 Warning / shutdown with common LED indication of shutdowns for:

 Low coolant level

 DC volts

 Generator phase sequence

 Overspeed

 Frequency (Hz)

 Volts (L-L & L-N)

 Reverse reactive power (kVAr) (32RV)

 Text alarm / event descriptions

 2 Programmable digital outputs

 RPM

 2 Programmable relay outputs (Form C)

 Speed adjust

 Alarm acknowledge

 kVAr-hr (total)

 Digital indication for:

 Power Factor (per phase & average)

 Environmental sealed front face

 Controls:

 True RMS AC metering, 3 phase, +/-2% accuracy

 Low oil pressure

 kW (per phase, average & percent)

 Engine cycle crank

 Accessory module data link

 Coolant temperature

 EMCP 4.2

 24 Volt DC operation

 Over / under frequency (81 o/u)

 Amps (per phase & average)

 4 Programmable relay outputs (Form A)

 Reverse power (kW) (32)

 Operating hours

 Communications

 Oil pressure (psi, kPa or bar)

 Serial annunciator module data link

 kW-hr (total)

 6 Programmable digital inputs

 High coolant temperature

 Failure to start (overcrank)

 Low coolant temperature

 Lamp test

 Emergency stop

 Auto / start / stop control

 Customer data link (Modbus RTU)

 Exhaust flange outlet

 Secondary fuel filter

 Primary fuel filter with integral water separator

 Fuel priming pump

 Engine cool-down timer.

 DC volts

 True RMS AC metering, 3-phase, +/-2% accuracy

 High coolant temperature

 Coolant temperature

 Auto/start/stop control

 Failure to start (overcrank)

 Communications

 Oil pressure

 Emergency stop

 EMCP4.2B

 Overspeed

 frequency (Hz)

 Volts (L-L & L-N)

 Engine cycle crank

 Warnings / Shutdown indicators

 Speed adjust

 Lamp test

 24-volt DC operation

 RPM

 4 programmable digital inputs

 Low coolant level

 Operating hours

 Alarm acknowledge

 Emergency stop pushbutton

 Low oil pressure

 Amps (per phase & average)

 4 programmable digital outputs

 Digital indication for:

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Bus Bar

 Class H temperature rise at 40C ambient

 3 phase brushless, salient pole

 6 lead

 Winding temperature detectors

 NEMA Class H insulation

 Random wound

 Internal Excitation

 3-phase voltage sensing

 Bus bar connections

 min/max exciter

 RFI suppression

 English

 Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

 JWAC

 Coolant level sensors. (Not included with packages without radiator)

 Coolant drain line with valve

 Radiator fan and fan drive

 Fan and belt guards

 Dry exhaust manifold

 Flanged faced outlet(s)

 Fuel priming pump

 Secondary fuel filters

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

 3 Phase voltage sensing

 RFI suppression

 Class H temperature rise at 40C ambient (125C prime / 150C standby)

 Min / max exciter limiter

 Exciter diode monitor

 Busbar connections, top center mounted, top cable entry

 3 Phase brushless, salient pole

 50 Hz models: IEC standard hole pattern

 Random wound

 Generator set packages include: Regulator (CDVR)

 Reactive droop capability

 6 Leads

 KVAR / PF modes

 NEMA Class H insulation

 Winding temperature detectors

 Internal Excitation

 LV:

 Woodward 2301A isochronous governor

 Lubricating oil

 Gear type lube oil pump

 Integral lube oil cooler

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Rails - engine / generator / radiator mounting

 Rubber anti-vibration mounts (shipped loose)

 Battery disconnect switch

 Battery and battery rack w/cables

 24-volt electric starting motor

 SAE standard rotation

 Flywheel and Flywheel housing-SAE No. 00

 RH Service

 Paint - Caterpillar yellow with high gloss black rails & radiator

Control Panel

 EMCP 4 Genset Controller

General

 Paint - Caterpillar Yellow except rails and radiators gloss black

Air Inlet System

Aingle element canister type air cleaner with service indicator

Air Inlet

Air Cleaner

Cooling

Package mounted radiator (except C175)

Control Panel

Emergency stop button

Programmable protective relaying functions:

Over / under voltage (27 / 59)

kVAr (per phase, average & percent)

kVA (per phase, average & percent)

Engine cool-down timer

Generator mounted - rear facing

Overcurrent (50 / 51)

Warning / shutdown with common LED indication of shutdowns for:

Low coolant level

DC volts

Generator phase sequence

Overspeed

Frequency (Hz)

Volts (L-L & L-N)

Reverse reactive power (kVAr) (32RV)

Text alarm / event descriptions

2 Programmable digital outputs

RPM

2 Programmable relay outputs (Form C)

Speed adjust

Alarm acknowledge

kVAr-hr (total)

Digital indication for:

Power Factor (per phase & average)

Environmental sealed front face

Controls:

True RMS AC metering, 3 phase, +/-2% accuracy

Low oil pressure

kW (per phase, average & percent)

Engine cycle crank

Accessory module data link

Coolant temperature

EMCP 4.2

24 Volt DC operation

Over / under frequency (81 o/u)

Amps (per phase & average)

4 Programmable relay outputs (Form A)

Reverse power (kW) (32)

Operating hours

Communications

Oil pressure (psi, kPa or bar)

Serial annunciator module data link

kW-hr (total)

6 Programmable digital inputs

High coolant temperature

Failure to start (overcrank)

Low coolant temperature

Lamp test

Emergency stop

Auto / start / stop control

Customer data link (Modbus RTU)

Exhaust

Exhaust flange outlet

Fuel

Secondary fuel filter

Primary fuel filter with integral water separator

Fuel priming pump

Control System

Engine cool-down timer.

DC volts

True RMS AC metering, 3-phase, +/-2% accuracy

High coolant temperature

Coolant temperature

Auto/start/stop control

Failure to start (overcrank)

Communications

Oil pressure

Emergency stop

EMCP4.2B

Overspeed

frequency (Hz)

Volts (L-L & L-N)

Engine cycle crank

Warnings / Shutdown indicators

Speed adjust

Lamp test

24-volt DC operation

RPM

4 programmable digital inputs

Low coolant level

Operating hours

Alarm acknowledge

Emergency stop pushbutton

Low oil pressure

Amps (per phase & average)

4 programmable digital outputs

Digital indication for:

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Bus Bar

Generator System

Class H temperature rise at 40C ambient

3 phase brushless, salient pole

6 lead

Winding temperature detectors

NEMA Class H insulation

Random wound

Internal Excitation

3-phase voltage sensing

Bus bar connections

min/max exciter

RFI suppression

Literature

English

Cooling System

Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

JWAC

Coolant level sensors. (Not included with packages without radiator)

Coolant drain line with valve

Radiator fan and fan drive

Fan and belt guards

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Fuel priming pump

Secondary fuel filters

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

3 Phase voltage sensing

RFI suppression

Class H temperature rise at 40C ambient (125C prime / 150C standby)

Min / max exciter limiter

Exciter diode monitor

Busbar connections, top center mounted, top cable entry

3 Phase brushless, salient pole

50 Hz models: IEC standard hole pattern

Random wound

Generator set packages include: Regulator (CDVR)

Reactive droop capability

6 Leads

KVAR / PF modes

NEMA Class H insulation

Winding temperature detectors

Internal Excitation

LV:

Governing System

Woodward 2301A isochronous governor

Lube System

Lubricating oil

Gear type lube oil pump

Integral lube oil cooler

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Mounting System

Rails - engine / generator / radiator mounting

Rubber anti-vibration mounts (shipped loose)

Starting / Charging System

Battery disconnect switch

Battery and battery rack w/cables

24-volt electric starting motor

General

SAE standard rotation

Flywheel and Flywheel housing-SAE No. 00

RH Service

Paint - Caterpillar yellow with high gloss black rails & radiator

Air Inlet System

Aingle element canister type air cleaner with service indicator

Air Inlet

Air Cleaner

Cooling

Package mounted radiator (except C175)

Control Panel

Emergency stop button

Programmable protective relaying functions:

Over / under voltage (27 / 59)

kVAr (per phase, average & percent)

kVA (per phase, average & percent)

Engine cool-down timer

Generator mounted - rear facing

Overcurrent (50 / 51)

Warning / shutdown with common LED indication of shutdowns for:

Low coolant level

DC volts

Generator phase sequence

Overspeed

Frequency (Hz)

Volts (L-L & L-N)

Reverse reactive power (kVAr) (32RV)

Text alarm / event descriptions

2 Programmable digital outputs

RPM

2 Programmable relay outputs (Form C)

Speed adjust

Alarm acknowledge

kVAr-hr (total)

Digital indication for:

Power Factor (per phase & average)

Environmental sealed front face

Controls:

True RMS AC metering, 3 phase, +/-2% accuracy

Low oil pressure

kW (per phase, average & percent)

Engine cycle crank

Accessory module data link

Coolant temperature

EMCP 4.2

24 Volt DC operation

Over / under frequency (81 o/u)

Amps (per phase & average)

4 Programmable relay outputs (Form A)

Reverse power (kW) (32)

Operating hours

Communications

Oil pressure (psi, kPa or bar)

Serial annunciator module data link

kW-hr (total)

6 Programmable digital inputs

High coolant temperature

Failure to start (overcrank)

Low coolant temperature

Lamp test

Emergency stop

Auto / start / stop control

Customer data link (Modbus RTU)

Exhaust

Exhaust flange outlet

Fuel

Secondary fuel filter

Primary fuel filter with integral water separator

Fuel priming pump

Control System

Engine cool-down timer.

DC volts

True RMS AC metering, 3-phase, +/-2% accuracy

High coolant temperature

Coolant temperature

Auto/start/stop control

Failure to start (overcrank)

Communications

Oil pressure

Emergency stop

EMCP4.2B

Overspeed

frequency (Hz)

Volts (L-L & L-N)

Engine cycle crank

Warnings / Shutdown indicators

Speed adjust

Lamp test

24-volt DC operation

RPM

4 programmable digital inputs

Low coolant level

Operating hours

Alarm acknowledge

Emergency stop pushbutton

Low oil pressure

Amps (per phase & average)

4 programmable digital outputs

Digital indication for:

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Bus Bar

Generator System

Class H temperature rise at 40C ambient

3 phase brushless, salient pole

6 lead

Winding temperature detectors

NEMA Class H insulation

Random wound

Internal Excitation

3-phase voltage sensing

Bus bar connections

min/max exciter

RFI suppression

Literature

English

Cooling System

Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

JWAC

Coolant level sensors. (Not included with packages without radiator)

Coolant drain line with valve

Radiator fan and fan drive

Fan and belt guards

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Fuel priming pump

Secondary fuel filters

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

3 Phase voltage sensing

RFI suppression

Class H temperature rise at 40C ambient (125C prime / 150C standby)

Min / max exciter limiter

Exciter diode monitor

Busbar connections, top center mounted, top cable entry

3 Phase brushless, salient pole

50 Hz models: IEC standard hole pattern

Random wound

Generator set packages include: Regulator (CDVR)

Reactive droop capability

6 Leads

KVAR / PF modes

NEMA Class H insulation

Winding temperature detectors

Internal Excitation

LV:

Governing System

Woodward 2301A isochronous governor

Lube System

Lubricating oil

Gear type lube oil pump

Integral lube oil cooler

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Mounting System

Rails - engine / generator / radiator mounting

Rubber anti-vibration mounts (shipped loose)

Starting / Charging System

Battery disconnect switch

Battery and battery rack w/cables

24-volt electric starting motor

General

SAE standard rotation

Flywheel and Flywheel housing-SAE No. 00

RH Service

Paint - Caterpillar yellow with high gloss black rails & radiator

Air Inlet System

Aingle element canister type air cleaner with service indicator

Air Inlet

Air Cleaner

Cooling

Package mounted radiator (except C175)

Control Panel

Emergency stop button

Programmable protective relaying functions:

Over / under voltage (27 / 59)

kVAr (per phase, average & percent)

kVA (per phase, average & percent)

Engine cool-down timer

Generator mounted - rear facing

Overcurrent (50 / 51)

Warning / shutdown with common LED indication of shutdowns for:

Low coolant level

DC volts

Generator phase sequence

Overspeed

Frequency (Hz)

Volts (L-L & L-N)

Reverse reactive power (kVAr) (32RV)

Text alarm / event descriptions

2 Programmable digital outputs

RPM

2 Programmable relay outputs (Form C)

Speed adjust

Alarm acknowledge

kVAr-hr (total)

Digital indication for:

Power Factor (per phase & average)

Environmental sealed front face

Controls:

True RMS AC metering, 3 phase, +/-2% accuracy

Low oil pressure

kW (per phase, average & percent)

Engine cycle crank

Accessory module data link

Coolant temperature

EMCP 4.2

24 Volt DC operation

Over / under frequency (81 o/u)

Amps (per phase & average)

4 Programmable relay outputs (Form A)

Reverse power (kW) (32)

Operating hours

Communications

Oil pressure (psi, kPa or bar)

Serial annunciator module data link

kW-hr (total)

6 Programmable digital inputs

High coolant temperature

Failure to start (overcrank)

Low coolant temperature

Lamp test

Emergency stop

Auto / start / stop control

Customer data link (Modbus RTU)

Exhaust

Exhaust flange outlet

Fuel

Secondary fuel filter

Primary fuel filter with integral water separator

Fuel priming pump

Control System

Engine cool-down timer.

DC volts

True RMS AC metering, 3-phase, +/-2% accuracy

High coolant temperature

Coolant temperature

Auto/start/stop control

Failure to start (overcrank)

Communications

Oil pressure

Emergency stop

EMCP4.2B

Overspeed

frequency (Hz)

Volts (L-L & L-N)

Engine cycle crank

Warnings / Shutdown indicators

Speed adjust

Lamp test

24-volt DC operation

RPM

4 programmable digital inputs

Low coolant level

Operating hours

Alarm acknowledge

Emergency stop pushbutton

Low oil pressure

Amps (per phase & average)

4 programmable digital outputs

Digital indication for:

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Bus Bar

Generator System

Class H temperature rise at 40C ambient

3 phase brushless, salient pole

6 lead

Winding temperature detectors

NEMA Class H insulation

Random wound

Internal Excitation

3-phase voltage sensing

Bus bar connections

min/max exciter

RFI suppression

Literature

English

Cooling System

Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

JWAC

Coolant level sensors. (Not included with packages without radiator)

Coolant drain line with valve

Radiator fan and fan drive

Fan and belt guards

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Fuel priming pump

Secondary fuel filters

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Note: 1800 frames are form wound, permanent magnet, with winding temp detectors

3 Phase voltage sensing

RFI suppression

Class H temperature rise at 40C ambient (125C prime / 150C standby)

Min / max exciter limiter

Exciter diode monitor

Busbar connections, top center mounted, top cable entry

3 Phase brushless, salient pole

50 Hz models: IEC standard hole pattern

Random wound

Generator set packages include: Regulator (CDVR)

Reactive droop capability

6 Leads

KVAR / PF modes

NEMA Class H insulation

Winding temperature detectors

Internal Excitation

LV:

Governing System

Woodward 2301A isochronous governor

Lube System

Lubricating oil

Gear type lube oil pump

Integral lube oil cooler

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Mounting System

Rails - engine / generator / radiator mounting

Rubber anti-vibration mounts (shipped loose)

Starting / Charging System

Battery disconnect switch

Battery and battery rack w/cables

24-volt electric starting motor

General

SAE standard rotation

Flywheel and Flywheel housing-SAE No. 00

RH Service

Paint - Caterpillar yellow with high gloss black rails & radiator

Exhaust

 Exhaust mufflers <!--(except Tier 4)-->

Exhaust mufflers

Generator

 Anti-condensation heater

 Internal excitation (IE)

 Permanent magnet excitation (PMG)

 Oversize and premium generators

Anti-condensation heater

Internal excitation (IE)

Permanent magnet excitation (PMG)

Oversize and premium generators

Power Termination

 Circuit breakers, UL listed

 Circuit breakers, IEC compliant

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

 EMCP 4.2

 EMCP 4.3

 EMCP 4.4

 Generator temperature monitoring & protection

 Load share module

 Digital I/O module

 Remote monitoring software

EMCP 4.2

EMCP 4.3

EMCP 4.4

Generator temperature monitoring & protection

Load share module

Digital I/O module

Remote monitoring software

Mounting

 Rubber anti-vibration mounts

 Spring-type vibration isolator

 IBC isolators

Rubber anti-vibration mounts

Spring-type vibration isolator

IBC isolators

Starting/Charging

 Battery chargers

 Oversize batteries

 Jacket water heater

 Heavy-duty starting system

 Charging alternator

 Air starting motor with control and silencer

Battery chargers

Oversize batteries

Jacket water heater

Heavy-duty starting system

Charging alternator

Air starting motor with control and silencer

General

 The following options are based on regional and product configuration:

 Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

 UL 2200 package

 EU Certificate of Conformance (CE)

 CSA Certification

 EEC Declaration of Conformity

 Enclosures: sound attenuated, weather protective

 Automatic transfer switches (ATS)

 Integral & sub-base fuel tanks

 Integral & sub-base UL listed dual wall fuel tanks

The following options are based on regional and product configuration:

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

UL 2200 package

EU Certificate of Conformance (CE)

CSA Certification

EEC Declaration of Conformity

Enclosures: sound attenuated, weather protective

Automatic transfer switches (ATS)

Integral & sub-base fuel tanks

Integral & sub-base UL listed dual wall fuel tanks

Air Inlet System

Air Inlet protection

Remote air inlet adaptors

Dual element air cleaners

Exhaust

Exhaust mufflers

Generator

Anti-condensation heater

Internal excitation (IE)

Permanent magnet excitation (PMG)

Oversize and premium generators

Circuit Breakers

Cable entry options

2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated circuit breakers

Busbar connections

Center posts busbars

Controls packaging - Enclosures

2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated circuit breakers

Optional busbar power connections

EMAX breakers connections

EMAX circuit breakers

Breaker harnesses

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

Annunciator modules

Customer connection mounting locations

Remote speed adjust

Local PC monitoring

Generator temperature monitoring

Auxiliary boxes

Governors

Customer interface options

EMCP 4.3, EMCP 4.4

Ground (Automatically selected)

Mounting group - External box clips

Vandle proof panel door

Mounting

Rubber anti-vibration mounts

IBC isolators

Spring-type vibration isolator

Starting/Charging

Oversize batteries

Air starting motor with control and silencer

Jacket water heater

Heavy-duty starting system

Charging alternator

Battery chargers

Cooling System

Water level switch gauges

Optional radiator arrangements

Heat exchangers

European Certifications

European Union certification

EU declaration of conformity

European directive genset, DoI (Declaration of Incorporation)

Eurasian conformity (EAC) mark

Exhaust System

Mufflers

Muffler mounting kits

Through-wall installation kit

Flexible fittings

Fuel System

Primary fuel filter

Generators and Attachments

Generator conversion

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, form wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, internal excitation, No. of leads = 6, pitch= 0.6667

Space heater

Instrumentation

Pyrometer and thermocouples

Lube System

Oil level Reg-1 shallow pan

Electric prelube pumps

Manual prelube sump pumps

Mounting System

IBC vibration isolators

Spring-type vibration isolator

Protection System

Explosion relief valve

Special Tests / Reports

PGS test report @ 0.80 power factor

Neutral ground-LV

IBC seismic certifications

PGS test report @ 1.0 power factor

Neutral grounding connection

Starting / Charging System

Oversize battery set

Jacket water heaters

10 Amp battery chargers

Ether starting aid

24 Volt dual electric starting motor

20 Amp battery charger

General

Engine barring group

Air Inlet System

Air Inlet protection

Remote air inlet adaptors

Dual element air cleaners

Exhaust

Exhaust mufflers

Generator

Anti-condensation heater

Internal excitation (IE)

Permanent magnet excitation (PMG)

Oversize and premium generators

Circuit Breakers

Cable entry options

2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated circuit breakers

Busbar connections

Center posts busbars

Controls packaging - Enclosures

2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated circuit breakers

Optional busbar power connections

EMAX breakers connections

EMAX circuit breakers

Breaker harnesses

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

Annunciator modules

Customer connection mounting locations

Remote speed adjust

Local PC monitoring

Generator temperature monitoring

Auxiliary boxes

Governors

Customer interface options

EMCP 4.3, EMCP 4.4

Ground (Automatically selected)

Mounting group - External box clips

Vandle proof panel door

Mounting

Rubber anti-vibration mounts

IBC isolators

Spring-type vibration isolator

Starting/Charging

Oversize batteries

Air starting motor with control and silencer

Jacket water heater

Heavy-duty starting system

Charging alternator

Battery chargers

Cooling System

Water level switch gauges

Optional radiator arrangements

Heat exchangers

European Certifications

European Union certification

EU declaration of conformity

European directive genset, DoI (Declaration of Incorporation)

Eurasian conformity (EAC) mark

Exhaust System

Mufflers

Muffler mounting kits

Through-wall installation kit

Flexible fittings

Fuel System

Primary fuel filter

Generators and Attachments

Generator conversion

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, form wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, internal excitation, No. of leads = 6, pitch= 0.6667

Space heater

Instrumentation

Pyrometer and thermocouples

Lube System

Oil level Reg-1 shallow pan

Electric prelube pumps

Manual prelube sump pumps

Mounting System

IBC vibration isolators

Spring-type vibration isolator

Protection System

Explosion relief valve

Special Tests / Reports

PGS test report @ 0.80 power factor

Neutral ground-LV

IBC seismic certifications

PGS test report @ 1.0 power factor

Neutral grounding connection

Starting / Charging System

Oversize battery set

Jacket water heaters

10 Amp battery chargers

Ether starting aid

24 Volt dual electric starting motor

20 Amp battery charger

General

Engine barring group

Air Inlet System

Air Inlet protection

Remote air inlet adaptors

Dual element air cleaners

Exhaust

Exhaust mufflers

Generator

Anti-condensation heater

Internal excitation (IE)

Permanent magnet excitation (PMG)

Oversize and premium generators

Circuit Breakers

Cable entry options

2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated circuit breakers

Busbar connections

Center posts busbars

Controls packaging - Enclosures

2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated circuit breakers

Optional busbar power connections

EMAX breakers connections

EMAX circuit breakers

Breaker harnesses

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

Annunciator modules

Customer connection mounting locations

Remote speed adjust

Local PC monitoring

Generator temperature monitoring

Auxiliary boxes

Governors

Customer interface options

EMCP 4.3, EMCP 4.4

Ground (Automatically selected)

Mounting group - External box clips

Vandle proof panel door

Mounting

Rubber anti-vibration mounts

IBC isolators

Spring-type vibration isolator

Starting/Charging

Oversize batteries

Air starting motor with control and silencer

Jacket water heater

Heavy-duty starting system

Charging alternator

Battery chargers

Cooling System

Water level switch gauges

Optional radiator arrangements

Heat exchangers

European Certifications

European Union certification

EU declaration of conformity

European directive genset, DoI (Declaration of Incorporation)

Eurasian conformity (EAC) mark

Exhaust System

Mufflers

Muffler mounting kits

Through-wall installation kit

Flexible fittings

Fuel System

Primary fuel filter

Generators and Attachments

Generator conversion

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, form wound, permanent magnet, No. of leads = 6, pitch= 0.6667

1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, internal excitation, No. of leads = 6, pitch= 0.6667

Space heater

Instrumentation

Pyrometer and thermocouples

Lube System

Oil level Reg-1 shallow pan

Electric prelube pumps

Manual prelube sump pumps

Mounting System

IBC vibration isolators

Spring-type vibration isolator

Protection System

Explosion relief valve

Special Tests / Reports

PGS test report @ 0.80 power factor

Neutral ground-LV

IBC seismic certifications

PGS test report @ 1.0 power factor

Neutral grounding connection

Starting / Charging System

Oversize battery set

Jacket water heaters

10 Amp battery chargers

Ether starting aid

24 Volt dual electric starting motor

20 Amp battery charger

General

Engine barring group