3512 Generator Set
Diesel Generator Sets
-
Specification Summary
- Standby Rating 1400/1250 kVA
- Prime Power Rating 1275/1150 kVA
- Emissions/Fuel Strategy Low Fuel Consumption
- Voltage 380 to 415 Volts
- Download Brochure
Generator Set Specifications
| Standby Rating | 1400/1250 kVA |
| Prime Power Rating | 1275/1150 kVA |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Voltage | 380 to 415 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Mission Critical, Prime, Continuous |
| Maximum Rating | 1400 kVA |
| Minimum Rating | 1000 kVA |
Engine Specifications
| Engine Model | 3512 TA, V-12, 4-Stroke Water-Cooled Diesel |
| Bore | 170 mm |
| Stroke | 190 mm |
| Displacement | 51.8 l |
| Compression Ratio | 13.5:1 |
| Aspiration | TA |
| Fuel System | Direct Unit Injection |
| Governor Type | Woodward |
Generator Set Dimensions
| Length - Minimum | 5149 mm |
| Length - Maximum | 5249 mm |
| Width - Maximum | 1975 mm |
| Height - Maximum | 2367 mm |
| Dry Weight - Genset (minimum) | 10270 kg |
| Dry Weight - Genset (maximum) | 10510 kg |
Air Inlet
Air Cleaner
Cooling
Package mounted radiator
Package mounted radiator
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Exhaust
Exhaust flange outlet
Exhaust flange outlet
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Fuel
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Primary fuel filter with integral water separator
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Secondary fuel filter
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Fuel priming pump
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Power Termination
Bus Bar
Control Panel
EMCP 4 Genset Controller
General
Paint - Caterpillar Yellow except rails and radiators gloss black
Paint - Caterpillar Yellow except rails and radiators gloss black
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air cleaner; single element canister type with service indicator
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Woodward 2301A isochronous governor
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air Inlet System
Air cleaner; single element canister type with service indicator
Control Panel
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
Cooling System
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Exhaust System
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel System
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generators and Attachments
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Governing System
Woodward 2301A isochronous governor
Lube System
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Mounting System
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
Starting / Charging System
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
General
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air Inlet System
Air cleaner; single element canister type with service indicator
Control Panel
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
Cooling System
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Exhaust System
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel System
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generators and Attachments
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Governing System
Woodward 2301A isochronous governor
Lube System
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Mounting System
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
Starting / Charging System
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
General
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Air Inlet System
Air cleaner; single element canister type with service indicator
Control Panel
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
Cooling System
JWAC
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
Radiator fan and fan drive
Fan and belt guards
Coolant drain line with valve
Coolant level sensors. (Not included with packages without radiator)
Exhaust System
Dry Exhaust Manifold
Flanged faced outlet(s)
Fuel System
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose
Fuel priming pump
Secondary fuel filters
Generators and Attachments
Generator set packages include: Regulator (CDVR)
6 Lead
Min / max exciter limiter
LV:
Reactive droop capability
Random wound
Exciter diode monitor
KVAR/PF modes
NEMA Class H insulation
50 Hz models: IEC standard hole pattern
Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
Busbar connections, top center mounted, top cable entry
Internal Excitation
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime/150C standby)
3 Phase brushless, salient pole
3 Phase voltage sensing
RFI suppression
Governing System
Woodward 2301A isochronous governor
Lube System
Oil drain lines and valve
Gear type lube oil pump
Fumes disposal
Oil filter, filler and dipstick
Lubricating oil
Integral lube oil cooler
Mounting System
Rubber anti-vibration mounts (shipped loose)
Rails - engine/generator/radiator mounting
Starting / Charging System
24 Volt electric starting motor
Battery and battery rack w/cables
Battery disconnect switch
General
Paint - Caterpillar Yellow with high gloss black rails & radiator
SAE Standard Rotation
RH Service
Flywheel and Flywheel housing - SAE No. 00
Exhaust
Exhaust mufflers <!--(except Tier 4)-->
Exhaust mufflers
Generator
Anti-condensation heater
Internal excitation (IE)
Permanent magnet excitation (PMG)
Oversize and premium generators
Power Termination
Circuit breakers, UL listed
Circuit breakers, IEC compliant
Circuit breakers, UL listed
Circuit breakers, IEC compliant
Control Panels
EMCP 4.2
EMCP 4.3
EMCP 4.4
Generator temperature monitoring & protection
Load share module
Digital I/O module
Remote monitoring software
EMCP 4.2
EMCP 4.3
EMCP 4.4
Generator temperature monitoring & protection
Load share module
Digital I/O module
Remote monitoring software
Mounting
Rubber anti-vibration mounts
Spring-type vibration isolator
IBC isolators
Starting/Charging
Battery chargers
Oversize batteries
Jacket water heater
Heavy-duty starting system
Charging alternator
Air starting motor with control and silencer
General
The following options are based on regional and product configuration:
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
UL 2200 package
EU Certificate of Conformance (CE)
CSA Certification
EEC Declaration of Conformity
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
Integral & sub-base fuel tanks
Integral & sub-base UL listed dual wall fuel tanks
30 Mins