Maximum Rating | 550 kVA |
Minimum Rating | 365 kVA |
Emissions/Fuel Strategy | Tier 2 or Tier 3 |
Voltage | 208 to 600 Volts |
Frequency | 50 Hz |
Speed | 1500 rpm |
Duty Cycle | Standby, Prime |
Engine Model | C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
Bore | 137.2 mm |
Stroke | 171.4 mm |
Displacement | 15.2 l |
Compression Ratio | 16.1:1 |
Aspiration | Air to Air Aftercooled |
Fuel System | MEUI |
Governor Type | Adem™A4 |
Length - Maximum | 3830 mm |
Width - Maximum | 1481 mm |
Height - Maximum | 2193 mm |
Air Cleaner
Package mounted radiator
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Matched to the performance and output characteristics of Cat engines
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
IP23 Protection
Bus Bar
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
EMCP 4 Genset Controller
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Rubber vibration isolators
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
Turbocharger
Aftercooler core
Air Cleaner - Non Canister disposable paper filter
Air Cleaner
EMCP 4.2
Package mounted radiator
Caterpillar Extended Life Coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank / base supplied
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator & secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Bus Bar
Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated Voltage Regulator
Power center, IP22
Rubber vibration isolators
Cat Electronic Governor (ADEM A4).
Oil cooler
Oil drain valves
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
24 Volt battery with rack and cables
Engine and alternator pre paint, Caterpillar yellow
24 volt starting motor
Batteries
Paint - Caterpillar Yellow except rails and radiators gloss black
Industrial, Residential, Critical Mufflers
Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
Anti-condensation heater
Oversize and premium generators
Circuit breakers, UL listed
Circuit breakers, IEC compliant
EMCP (4.2) (4.3) (4.4)
Local & remote annunciator modules
Load share module
Digital I/O module
Remote monitoring software
Battery chargers
Oversize batteries
Jacket water heater
Heavy-duty starting system
Charging alternator
The following options are based on regional and product configuration:
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
UL 2200 package
EU Certificate of Conformance (CE)
CSA Certification
EEC Declaration of Conformity
Narrow, Wide or Skid Base
Sound attenuated, weather protective or high ambient weather protective enclosure
Single or dual wall integral fuel tanks
Single or dual wall sub-base fuel tanks
Integral & sub-base UL listed dual wall fuel tanks
Automatic transfer switches (ATS)