3516E Low Voltage Generator Set

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

Air Inlet

 Air Cleaner

Air Cleaner

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Cooling

 Package mounted radiator

Exhaust

 Exhaust flange outlet

Exhaust flange outlet

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Fuel

 Primary fuel filter with integral water separator

 Secondary fuel filter

 Fuel priming pump

Primary fuel filter with integral water separator

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Secondary fuel filter

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Fuel priming pump

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Generator

 Matched to the performance and output characteristics of Cat engines

 IP23 Protection

Power Termination

 Bus Bar

Control Panel

 EMCP 4 Genset Controller

General

 Paint - Caterpillar Yellow except rails and radiators gloss black

Starting/Charging

 Heavy-duty starting system

 Charging alternator

Heavy-duty starting system

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Charging alternator

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

 Air cleaner

 Single element canister type with service indicator

 Environmental sealed front face

 Warning/shutdown with common LED indication of shutdowns for:

 Overspeed

 RPM

 Generator phase sequence

 Emergency stop pushbutton

 Digital indication for:

 Text alarm / event descriptions

 2 Programmable digital outputs

 Reverse reactive power (kVAr) (32RV)

 Reverse power (kW) (32)

 Failure to start (overcrank)

 Panel lights

 Speed adjust

 Oil pressure (psi, kPa or bar)

 Low coolant level

 Generator mounted - rear facing

 Over / under frequency (81 o/u)

 Lamp test

 True RMS AC metering, 3-phase, +/-2% accuracy

 Low coolant temperature

 Power Factor (per phase & average)

 Frequency (Hz)

 Overcurrent (50/51)

 High coolant temperature

 DC volts

 6 Programmable digital inputs

 Coolant temperature

 24 Volt DC operation

 Amps (per phase & average)

 Emergency stop

 Alarm acknowledge

 Programmable protective relaying functions:

 2 Programmable relay outputs (Form C)

 EMCP 4.2B

 Serial annunciator module data link

 Controls:

 kW-hr (total)

 kW (per phase, average & percent)

 Engine cool-down timer

 Operating hours

 EMCP 4 Genset Controller

 Volts (L-L & L-N)

 Engine cycle crank

 Communications:

 kVAr (per phase, average & percent)

 EMCP4.2B controller includes:

 Customer data link (Modbus RTU)

 Over / under voltage (27/59)

 Low oil pressure

 kVA (per phase, average & percent)

 kVAr-hr (total)

 4 Programmable relay outputs (Form A)

 Accessory module data link

 Exhaust flange outlet

 Primary fuel filter with integral water separator

 IP23 Protection

 Matched to the performance and output characteristics of Cat engines

 Busbar

 Heavy-duty starting system

 Charging alternator

 Caterpillar Extended Life Coolant

 Radiator fan and fan drive

 Fan and belt guards

 JWAC

 Coolant drain line with valve

 Coolant level sensors

 Package mounted radiator

 Dry exhaust manifold

 Flanged faced outlet(s)

 Secondary fuel filters

 Fuel priming pump

 Fuel cooler; not included with packages without radiator

 Flexible fuel lines - shipped loose

 Internal excitation

 6 Lead

 Busbar connections, top center mounted, top cable entry

 IEC standard hole pattern

 Random wound

 3 Phase brushless, salient pole

 Winding temperature detectors

 NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

 ADEM III

 English

 Lubricating oil

 Oil filter, filler and dipstick

 Fumes disposal

 Oil drain lines and valve

 Gear type lube oil pump

 Integral lube oil cooler

 Rubber anti-vibration mounts (shipped loose)

 Rails - engine / generator / radiator mounting

 Battery and battery rack w/cables

 24 Volt electric starting motor

 Battery disconnect switch

 Right hand servicing

 Paint: Caterpillar yellow with high gloss black rails & radiator

 Flywheel and flywheel housing-SAE No. 00

 SAE standard rotation

Air Inlet System

Air cleaner

Single element canister type with service indicator

Control Panel

Environmental sealed front face

Warning/shutdown with common LED indication of shutdowns for:

Overspeed

RPM

Generator phase sequence

Emergency stop pushbutton

Digital indication for:

Text alarm / event descriptions

2 Programmable digital outputs

Reverse reactive power (kVAr) (32RV)

Reverse power (kW) (32)

Failure to start (overcrank)

Panel lights

Speed adjust

Oil pressure (psi, kPa or bar)

Low coolant level

Generator mounted - rear facing

Over / under frequency (81 o/u)

Lamp test

True RMS AC metering, 3-phase, +/-2% accuracy

Low coolant temperature

Power Factor (per phase & average)

Frequency (Hz)

Overcurrent (50/51)

High coolant temperature

DC volts

6 Programmable digital inputs

Coolant temperature

24 Volt DC operation

Amps (per phase & average)

Emergency stop

Alarm acknowledge

Programmable protective relaying functions:

2 Programmable relay outputs (Form C)

EMCP 4.2B

Serial annunciator module data link

Controls:

kW-hr (total)

kW (per phase, average & percent)

Engine cool-down timer

Operating hours

EMCP 4 Genset Controller

Volts (L-L & L-N)

Engine cycle crank

Communications:

kVAr (per phase, average & percent)

EMCP4.2B controller includes:

Customer data link (Modbus RTU)

Over / under voltage (27/59)

Low oil pressure

kVA (per phase, average & percent)

kVAr-hr (total)

4 Programmable relay outputs (Form A)

Accessory module data link

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy-duty starting system

Charging alternator

Cooling System

Caterpillar Extended Life Coolant

Radiator fan and fan drive

Fan and belt guards

JWAC

Coolant drain line with valve

Coolant level sensors

Cooling

Package mounted radiator

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Secondary fuel filters

Fuel priming pump

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Internal excitation

6 Lead

Busbar connections, top center mounted, top cable entry

IEC standard hole pattern

Random wound

3 Phase brushless, salient pole

Winding temperature detectors

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

Governing System

ADEM III

Literature

English

Lube System

Lubricating oil

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Gear type lube oil pump

Integral lube oil cooler

Mounting System

Rubber anti-vibration mounts (shipped loose)

Rails - engine / generator / radiator mounting

Starting / Charging System

Battery and battery rack w/cables

24 Volt electric starting motor

Battery disconnect switch

General

Right hand servicing

Paint: Caterpillar yellow with high gloss black rails & radiator

Flywheel and flywheel housing-SAE No. 00

SAE standard rotation

Air Inlet System

Air cleaner

Single element canister type with service indicator

Control Panel

Environmental sealed front face

Warning/shutdown with common LED indication of shutdowns for:

Overspeed

RPM

Generator phase sequence

Emergency stop pushbutton

Digital indication for:

Text alarm / event descriptions

2 Programmable digital outputs

Reverse reactive power (kVAr) (32RV)

Reverse power (kW) (32)

Failure to start (overcrank)

Panel lights

Speed adjust

Oil pressure (psi, kPa or bar)

Low coolant level

Generator mounted - rear facing

Over / under frequency (81 o/u)

Lamp test

True RMS AC metering, 3-phase, +/-2% accuracy

Low coolant temperature

Power Factor (per phase & average)

Frequency (Hz)

Overcurrent (50/51)

High coolant temperature

DC volts

6 Programmable digital inputs

Coolant temperature

24 Volt DC operation

Amps (per phase & average)

Emergency stop

Alarm acknowledge

Programmable protective relaying functions:

2 Programmable relay outputs (Form C)

EMCP 4.2B

Serial annunciator module data link

Controls:

kW-hr (total)

kW (per phase, average & percent)

Engine cool-down timer

Operating hours

EMCP 4 Genset Controller

Volts (L-L & L-N)

Engine cycle crank

Communications:

kVAr (per phase, average & percent)

EMCP4.2B controller includes:

Customer data link (Modbus RTU)

Over / under voltage (27/59)

Low oil pressure

kVA (per phase, average & percent)

kVAr-hr (total)

4 Programmable relay outputs (Form A)

Accessory module data link

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy-duty starting system

Charging alternator

Cooling System

Caterpillar Extended Life Coolant

Radiator fan and fan drive

Fan and belt guards

JWAC

Coolant drain line with valve

Coolant level sensors

Cooling

Package mounted radiator

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Secondary fuel filters

Fuel priming pump

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Internal excitation

6 Lead

Busbar connections, top center mounted, top cable entry

IEC standard hole pattern

Random wound

3 Phase brushless, salient pole

Winding temperature detectors

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

Governing System

ADEM III

Literature

English

Lube System

Lubricating oil

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Gear type lube oil pump

Integral lube oil cooler

Mounting System

Rubber anti-vibration mounts (shipped loose)

Rails - engine / generator / radiator mounting

Starting / Charging System

Battery and battery rack w/cables

24 Volt electric starting motor

Battery disconnect switch

General

Right hand servicing

Paint: Caterpillar yellow with high gloss black rails & radiator

Flywheel and flywheel housing-SAE No. 00

SAE standard rotation

Air Inlet System

Air cleaner

Single element canister type with service indicator

Control Panel

Environmental sealed front face

Warning/shutdown with common LED indication of shutdowns for:

Overspeed

RPM

Generator phase sequence

Emergency stop pushbutton

Digital indication for:

Text alarm / event descriptions

2 Programmable digital outputs

Reverse reactive power (kVAr) (32RV)

Reverse power (kW) (32)

Failure to start (overcrank)

Panel lights

Speed adjust

Oil pressure (psi, kPa or bar)

Low coolant level

Generator mounted - rear facing

Over / under frequency (81 o/u)

Lamp test

True RMS AC metering, 3-phase, +/-2% accuracy

Low coolant temperature

Power Factor (per phase & average)

Frequency (Hz)

Overcurrent (50/51)

High coolant temperature

DC volts

6 Programmable digital inputs

Coolant temperature

24 Volt DC operation

Amps (per phase & average)

Emergency stop

Alarm acknowledge

Programmable protective relaying functions:

2 Programmable relay outputs (Form C)

EMCP 4.2B

Serial annunciator module data link

Controls:

kW-hr (total)

kW (per phase, average & percent)

Engine cool-down timer

Operating hours

EMCP 4 Genset Controller

Volts (L-L & L-N)

Engine cycle crank

Communications:

kVAr (per phase, average & percent)

EMCP4.2B controller includes:

Customer data link (Modbus RTU)

Over / under voltage (27/59)

Low oil pressure

kVA (per phase, average & percent)

kVAr-hr (total)

4 Programmable relay outputs (Form A)

Accessory module data link

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy-duty starting system

Charging alternator

Cooling System

Caterpillar Extended Life Coolant

Radiator fan and fan drive

Fan and belt guards

JWAC

Coolant drain line with valve

Coolant level sensors

Cooling

Package mounted radiator

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Secondary fuel filters

Fuel priming pump

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Generators and Attachments

Internal excitation

6 Lead

Busbar connections, top center mounted, top cable entry

IEC standard hole pattern

Random wound

3 Phase brushless, salient pole

Winding temperature detectors

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).

Governing System

ADEM III

Literature

English

Lube System

Lubricating oil

Oil filter, filler and dipstick

Fumes disposal

Oil drain lines and valve

Gear type lube oil pump

Integral lube oil cooler

Mounting System

Rubber anti-vibration mounts (shipped loose)

Rails - engine / generator / radiator mounting

Starting / Charging System

Battery and battery rack w/cables

24 Volt electric starting motor

Battery disconnect switch

General

Right hand servicing

Paint: Caterpillar yellow with high gloss black rails & radiator

Flywheel and flywheel housing-SAE No. 00

SAE standard rotation

Exhaust

 Exhaust mufflers

 Exhaust expanders

 Flexible fittings

Generator

 Anti-condensation heater

 Excitation: [ ] Permanent Magnet Excited (PM)

Power Termination

 Circuit breakers, IEC compliant

Circuit breakers, IEC compliant

Control Panels

 EMCP (4.2) (4.3) (4.4)

 Generator temperature monitoring & protection

 Load share module

 Digital I/O module

 Remote monitoring software

Mounting

 Rubber anti-vibration mounts

 Spring-type vibration isolator

 IBC isolators

Starting/Charging

 Battery chargers

 Oversize batteries

 Jacket water heater

General

 The following options are based on regional and product configuration:

 Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

 EU Certificate of Conformance (CE)

 EEC Declaration of Conformity

 Enclosures: sound attenuated, weather protective

 Automatic transfer switches (ATS)

 Integral & sub-base fuel tanks

Air Inlet System

Air inlet protection

Heavy duty air cleaners

Remote air inlet adapters

Dual element air cleaners

Circuit Breakers

Cable entry options

Control packaging for enclosures

Optional busbar power connections

EMAX breakers

Load take off; IEC standard hole

Center posts busbars

Trip Units

Power Termination

Circuit breakers, IEC compliant

Control Panels

External box clips

Local and remote monitoring

Busbar connections

Governors

Generator temperature monitoring

Auxiliary box

Voltage raise / lower switch

EMCP 4.3, EMCP 4.4

EMAX breaker connections

Language options

Remote speed adjust

Annunciator modules

Customer interface options

Vandal proof panel door

Cooling System

Optional Serpentine radiators

Water level switch gauges

Heat exchangers

Radiator duct flanges

European Certifications

EU declaration of conformity

Exhaust System

Mufflers

Through wall installation kit

Flexible fittings

Muffler mounting kits

Fuel System

Fuel coolers

Primary fuel filter

Generators and attachments

3 Phase, Random wound, Internal excitation

Internal excitation

Random wound

Pitch: 0.6667

Optional generators

Number of leads: 6

3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt
 

Instrumentation

Thermocouples

Pyrometers and thermocouples

Lube System

Manual prelube sump pumps

Oil level regulator

Electric prelube pumps

Mounting System

Spring type vibration isolators

IBC vibration isolators

Protection System

Explosion relief valves

Special Tests / Reports

PGS test report @ 0.8 power factor

CSA test and certification

Neutral ground certificate

PGS test report @ 1.0 power factor

IBC seismic certificate

Starting / Charging System

Jacket water heaters

ETHER starting aids

Dual 24 volt electric starting motors

24 Volt battery sets - Dry

Charging alternators - 50 Amp

10 and 20 amp battery chargers

General

Engine barring group

Air Inlet System

Air inlet protection

Heavy duty air cleaners

Remote air inlet adapters

Dual element air cleaners

Circuit Breakers

Cable entry options

Control packaging for enclosures

Optional busbar power connections

EMAX breakers

Load take off; IEC standard hole

Center posts busbars

Trip Units

Power Termination

Circuit breakers, IEC compliant

Control Panels

External box clips

Local and remote monitoring

Busbar connections

Governors

Generator temperature monitoring

Auxiliary box

Voltage raise / lower switch

EMCP 4.3, EMCP 4.4

EMAX breaker connections

Language options

Remote speed adjust

Annunciator modules

Customer interface options

Vandal proof panel door

Cooling System

Optional Serpentine radiators

Water level switch gauges

Heat exchangers

Radiator duct flanges

European Certifications

EU declaration of conformity

Exhaust System

Mufflers

Through wall installation kit

Flexible fittings

Muffler mounting kits

Fuel System

Fuel coolers

Primary fuel filter

Generators and attachments

3 Phase, Random wound, Internal excitation

Internal excitation

Random wound

Pitch: 0.6667

Optional generators

Number of leads: 6

3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt
 

Instrumentation

Thermocouples

Pyrometers and thermocouples

Lube System

Manual prelube sump pumps

Oil level regulator

Electric prelube pumps

Mounting System

Spring type vibration isolators

IBC vibration isolators

Protection System

Explosion relief valves

Special Tests / Reports

PGS test report @ 0.8 power factor

CSA test and certification

Neutral ground certificate

PGS test report @ 1.0 power factor

IBC seismic certificate

Starting / Charging System

Jacket water heaters

ETHER starting aids

Dual 24 volt electric starting motors

24 Volt battery sets - Dry

Charging alternators - 50 Amp

10 and 20 amp battery chargers

General

Engine barring group

Air Inlet System

Air inlet protection

Heavy duty air cleaners

Remote air inlet adapters

Dual element air cleaners

Circuit Breakers

Cable entry options

Control packaging for enclosures

Optional busbar power connections

EMAX breakers

Load take off; IEC standard hole

Center posts busbars

Trip Units

Power Termination

Circuit breakers, IEC compliant

Control Panels

External box clips

Local and remote monitoring

Busbar connections

Governors

Generator temperature monitoring

Auxiliary box

Voltage raise / lower switch

EMCP 4.3, EMCP 4.4

EMAX breaker connections

Language options

Remote speed adjust

Annunciator modules

Customer interface options

Vandal proof panel door

Cooling System

Optional Serpentine radiators

Water level switch gauges

Heat exchangers

Radiator duct flanges

European Certifications

EU declaration of conformity

Exhaust System

Mufflers

Through wall installation kit

Flexible fittings

Muffler mounting kits

Fuel System

Fuel coolers

Primary fuel filter

Generators and attachments

3 Phase, Random wound, Internal excitation

Internal excitation

Random wound

Pitch: 0.6667

Optional generators

Number of leads: 6

3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt
 

Instrumentation

Thermocouples

Pyrometers and thermocouples

Lube System

Manual prelube sump pumps

Oil level regulator

Electric prelube pumps

Mounting System

Spring type vibration isolators

IBC vibration isolators

Protection System

Explosion relief valves

Special Tests / Reports

PGS test report @ 0.8 power factor

CSA test and certification

Neutral ground certificate

PGS test report @ 1.0 power factor

IBC seismic certificate

Starting / Charging System

Jacket water heaters

ETHER starting aids

Dual 24 volt electric starting motors

24 Volt battery sets - Dry

Charging alternators - 50 Amp

10 and 20 amp battery chargers

General

Engine barring group