• Banner

14L AWD Motor Grader

Product Details

Engine

Engine Model* Cat C9 ACERT™
Base Power (1st gear, AWD off) – Net 159 kW
VHP Plus Range – Net 159-200 kW
Displacement 8.8 L
Bore 112 mm
Stroke 149 mm
Torque Rise (VHP Plus) 40%
Maximum Torque (AWD on) 1344 Nm
Speed @ Rated Power 2,000 rpm
Number of Cylinders 6
Derating Altitude 3048 m
High Ambient – Fan Speed – Maximum 1,650 rpm
High Ambient – Fan Speed – Minimum 600 rpm
High Ambient Capability 50 ° C

Weights

Gross Vehicle Weight – Base – Total 19280 kg
Gross Vehicle Weight – Base – Front Axle 5514 kg
Gross Vehicle Weight – Base – Rear Axle 13766 kg
Gross Vehicle Weight – Maximum – Total 22045 kg
Gross Vehicle Weight – Maximum – Front Axle 6614 kg
Gross Vehicle Weight – Maximum – Rear Axle 15432 kg
Gross Vehicle Weight – Typically Equipped – Total 21927 kg
Gross Vehicle Weight – Typically Equipped – Front Axle 6543 kg
Gross Vehicle Weight – Typically Equipped – Rear Axle 15384 kg

Moldboard

Moldboard - Width 4.3 m
Moldboard - Height 610 mm
Moldboard - Thickness 22.0 mm
Arc Radius 413 mm
Throat Clearance 95.0 mm
Cutting Edge – Width 152 mm
Cutting Edge – Thickness 16.0 mm
End Bit – Width 152 mm
End Bit – Thickness 16.0 mm
Blade Pull – Base GVW (AWD) 17352 kg
Blade Pull – Maximum GVW (AWD) 19840 kg
Down Pressure - Base GVW (AWD) 9465 kg
Down Pressure - Maximum GVW (AWD) 11352 kg

Dimensions

Height – Top of Cab 3363 mm
Height – Top of Cab Product LinkTM 3433 mm
Height – Front Axle Center 651 mm
Length – Between Tandem Axles 1523 mm
Length – Front Axle to Moldboard 2552 mm
Length – Front Axle to Mid Tandem 6123 mm
Length – Front Tire to Rear of Machine 8809 mm
Length – Push Plate to Ripper 10136 mm
Length – Push Plate to Ripper Retracted 9818 mm
Ground Clearance at Rear Axle 394 mm
Height to Top of Cylinders 3095 mm
Height to Exhaust Stack (AWD) 3311 mm
Width – Tire Center Lines Front (AWD) 2401 mm
Width – Outside Rear Tires 2684 mm
Width – Outside Front Tires (AWD) 2767 mm

Operating Specifications

Top Speed – Forward 45.0 km/h
Top Speed – Reverse 42.3 km/h
Turning Radius, Outside Front Tires 7.6 m
Steering Range – Left/Right 47.5 degrees
Articulation Angle – Left/Right 20 degrees
Forward – 1st 4.7 km/h
Forward – 2nd 6.3 km/h
Forward – 3rd 9.2 km/h
Forward – 4th 12.7 km/h
Forward – 5th 19.7 km/h
Forward – 6th 26.8 km/h
Forward – 7th 36.9 km/h
Forward – 8th 45.0 km/h
Reverse – 1st 3.7 km/h
Reverse – 2nd 6.9 km/h
Reverse – 3rd 10.0 km/h
Reverse – 4th 15.5 km/h
Reverse – 5th 29.1 km/h
Reverse – 6th 42.3 km/h

Service Refill

Fuel Capacity 416 L
Cooling System 40.0 L
Hydraulic System – Tank 64.0 L
Engine Oil 30.0 L
Trans./Diff./Final Drives 65.0 L
Tandem Housing (each) 80.0 L
Front Wheel Spindle Bearing Housing 0.50 L
Circle Drive Housing 7.0 L

Power Train

Forward/Reverse Gears 8 Forward/6 Reverse
Transmission Direct drive, power shift, countershaft
Brakes – Service Multiple oil disc
Brakes – Service, Surface Area 23000 cm2
Brakes – Parking Multiple oil disc
Brakes – Secondary Dual circuit control system

Hydraulic System

Circuit Type Electro-hydraulic load sensing, closed center
Pump Type Variable piston
Pump Output 210 L/min
Maximum System Pressure 24150 kPa
Standby Pressure 3100 kPa

Frame

Circle – Diameter 1553 mm
Circle – Height 160 mm
Circle – Blade Beam Thickness 40.0 mm
Drawbar – Height 152 mm
Drawbar – Width 76.2 mm
Front Frame Structure – Height 305 mm
Front Frame Structure – Width 305 mm
Front Frame Structure – Thickness 16.0 mm
Front Axle – Height to Center 626 mm
Front Axle – Wheel Lean, Left/Right 18 degrees
Front Axle – Total Oscillation per Side 32 degrees

Blade Range

Circle Centershift – Right 728 mm
Circle Centershift – Left 695 mm
Moldboard Sideshift – Right 950 mm
Moldboard Sideshift – Left 820 mm
Maximum Blade Position Angle 90 degrees
Blade Tip Range – Forward 40 degrees
Blade Tip Range – Backward 5 degrees
Maximum Shoulder Reach Outside of Tires – Right 2278 mm
Maximum Shoulder Reach Outside of Tires – Left 2090 mm
Maximum Lift above Ground 583 mm
Maximum Depth of Cut 466 mm

Standards

ROPS/FOPS ISO 3471:2008, ISO 3449:2005 Level II
Steering ISO 5010:2007
Brakes ISO 3450:2011
Sound ISO 6394:2008, ISO 6395:2008

Scarifier

Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing 116 mm
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders 5/11
Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum 412 mm
Front, V-Type, 5 or 11 Tooth – Working Width 1205 mm
Rear – Scarifying Depth, Maximum 211 mm
Rear – Working Width 2300 mm
Rear – Scarifier Shank Holders 9
Rear – Scarifier Shank Holder Spacing 267 mm

Net Power: VHP Plus

Gear: Forward – 1st 159 kW
Gear: Forward – 2nd 162 kW
Gear: Forward – 3rd 166 kW
Gear: Forward – 4th 170 kW
Gear: Forward – 5th 174 kW
Gear: Forward – 6th 177 kW
Gear: Forward – 7th 181 kW
Gear: Forward – 8th 185 kW
Gear: Reverse – 1st 159 kW
Gear: Reverse – 2nd 162 kW
Gear: Reverse – 3rd – 6th 166 kW

Ripper

Ripping Depth, Maximum 373 mm
Ripper Shank Holders 5
Ripper Shank Holder Spacing 533 mm
Penetration Force 9367 kg
Pryout Force 12061 kg
Machine Length Increase, Beam Raised 995 mm

Tandems

Height 572 mm
Width 204 mm
Sidewall Thickness – Inner 25 mm
Sidewall Thickness – Outer 18 mm
Drive Chain Pitch 50.8 mm
Wheel Axle Spacing 1523 mm
Tandem Oscillation – Front Up 15 degrees
Tandem Oscillation – Front Down 25 degrees

Optional Tire Arrangements

Rim Size 17 × 25
Wheel Group Multi-Piece
Tires 20.5R25

Operator Station

Industry leading cab design gives you unmatched comfort, visibility and ease of use, so your operators can be more confident and productive.

Structures, Drawbar, Circle and Moldboard

Durable structures with fast and simple DCM adjustments save you service time. Shims and wear strips save you money and make it easy to maintain factory tightness of components for better grading results.

Hydraulics

Load sensing, proportional hydraulics mean operators can rely on consistent power. This precise, predictable implement response will save time and help assure quality work.

Integrated Technologies

Grade control and machine monitoring technologies help you improve grading efficiency and enhance fleet management for improved machine utilization.

Safety

The safety of your operators and those on the job site is key in the design of every Cat® machine. Features like outstanding visibility, hydraulic lockout and redundant steering and braking systems help you meet your goals of getting everyone home safely at the end of each work day.

All Wheel Drive (AWD)

If you work in soft underfoot conditions where traction can be a challenge, optional All Wheel Drive (AWD) can give you the additional power to the ground you need to work more efficiently in mud, gravel, sand or snow. The added traction helps reduce sliding on side slopes.
  • Dedicated left and right pumps give you more precise hydraulic control. The infinitely variable pumps and motors maximize torque in each gear.
  • AWD automatically increases horsepower to maximize your power to the ground.
  • Standard Hydrostatic Mode disengages the transmission and provides hydraulic power to the front wheels only. Infinitely variable ground speed between 0-8 km/h (0-5 mph) is ideal for precise finish work.
  • Cat Steering Compensation System enables a "powered turn" by adjusting the outside front tire speed up to 50% faster than the inside tire. This gives you improved control, reduces surface damage and greatly reduces turning radius in poor underfoot conditions.
  • POWER TRAIN
    •  Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    •  Air-to-air after cooler (ATAAC)
    •  Belt, serpentine, automatic tensioner
    •  Brakes, oil disc, four-wheel, hydraulic
    •  Demand fan, hydraulic
    •  Differential Lock/Unlock, Automatic
    •  Drain, engine oil, ecology
    •  Electronic over speed protection
    •  Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Engine meets non-current U.S. EPA Tier 3 or EU Stage IIIA emission standards.
    •  Engine Idle Shutdown (EIS)
    •  Fuel tank, 416 L (110 gal), ground level access and sediment drain
    •  Fuel-water separator
    •  Muffler, underhood
    •  Parking brake - multi-disc, sealed, oil-cooled
    •  Priming pump, fuel
    •  Rear axle, modular
    •  Sediment drain, fuel tank
    •  Tandem drive
    •  Transmission, 8F/6R, power shift, direct drive
    •  Variable Horsepower Plus (VHP Plus)
  • ELECTRICAL
    •  Alarm, back up
    •  Alternator, 80 ampere, sealed
    •  Batteries, maintenance free, heavy duty, 1,125 CCA
    •  Breaker panel, ground accessible
    •  Cab harness and electrical hydraulic valves
    •  Electrical system, 24V
    •  Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
    •  Lights, roof-mounted roading, reversing, LED stop and tail
    •  Product Link Ready
    •  Starter, electric
  • OPERATOR ENVIRONMENT
    •  Accelerator
    •  Air conditioning with heater
    •  Arm and wrist rest, electronically adjustable
    •  Articulation, automatic Return-to-Center
    •  Cat Messenger operator information system
    •  Centershift pin indicator
    •  Coat hook
    •  Cup holder
    •  Display, digital speed and gear
    •  Doors, left and right side with wiper
    •  Gauge, machine level
    •  Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
    •  Hour meter, digital
    •  Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
    •  Joystick, adjustable armrests
    •  Joystick gear selection
    •  Joystick hydraulic power steering
    •  Ladders, cab, left and right side
    •  Lights, night time cab
    •  Mirror, inside rearview, wide angle
    •  Power port, 12V
    •  Radio Ready, Entertainment
    •  ROPS cab, sound suppressed
    •  Seat, cloth-covered, comfort suspension
    •  Seat belt, retractable 76 mm (3 in)
    •  Storage area for cooler/lunchbox
    •  Throttle control, electronic
    •  Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
  • FLUIDS
    •  Antifreeze
    •  Extended Life Coolant to -35° C (-30° F)
  • TIRES, RIMS AND WHEELS
    •  Partial allowance for tires on 432 × 635 mm (17 × 25 in) multi-piece rims is included in the base machine price and weight
  • OTHER STANDARD EQUIPMENT
    •  Anti-glare paint
    •  Bumper, rear, integrated with hitch
    •  CD ROM Parts Book
    •  Clutch, circle drive slip
    •  Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
    •  Doors (3), engine compartment, locking
    •  Drawbar - 6 shoes, replaceable wear strips
    •  Electrical hydraulic valves, hydraulic lines for base 8 functions
    •  Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
    •  Fluid check, ground level
    •  Frame, articulated, with safety lock
    •  Ground level engine shutdown
    •  Ground level fueling
    •  Hammer (emergency exit)
    •  Horn, electric
    •  Hydraulic lines for base functions
    •  Lockout, hydraulic implement (for roading and servicing)
    •  Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
    •  Mounting, cab roof accessories
    •  Pump, hydraulic, high capacity, 98 cm3 (6 in3)
    •  Radiator, cleanout access
    •  Secondary steering
    •  Serviceability, left-hand side
    •  SOSSM ports: engine, hydraulic, transmission, coolant, fuel
    •  Tandem walkway/guards
    •  Tool box
    •  Tow hitch
  • ELECTRICAL
    •  Alternator, 150 ampere
    •  Batteries: extreme duty, 1,400 CCA
    •  Converter, communication (CB)
    •  Lights: Headlights, high
    •  Lights: Headlights, low
    •  Lights: Working lights, basic
    •  Lights: Working lights, plus
    •  Lights: Warning: beacon or strobe
    •  Lights: Mounting for warning light
  • GUARDS
    •  Articulation guard
    •  Axle hose guard
    •  Sound guard (bottom)
    •  Transmission guard
  • OPERATOR ENVIRONMENT
    •  Deluxe CD radio with MP3 and Bluetooth technology
    •  Fan, defroster, rear window
    •  Mirrors, outside: mounted
    •  Precleaner, HVAC
    •  Radio ready, AM/FM
    •  Seat, air suspension, cloth
    •  Shade, sun
    •  Wiper/washer, rear
  • POWER TRAIN
    •  Transmission, autoshift
  • OTHER ATTACHMENTS
    •  AccuGrade ARO
    •  Accumulators, blade lift
    •  Camera, rearview
    •  Cat Grade Control Cross Slope
    •  Cat Product Link 321 (Satellite)
    •  Cat Product Link 522 (Cellular)
    •  Compressor/tank, air
    •  Heater, engine coolant: 120V
    •  Heater, engine coolant: 240V
    •  Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier.
    •  Security system
    •  Sound suppression
  • WORK TOOLS/GROUND ENGAGING TOOLS
    •  Blade extension, left hand, 610 mm (2 ft)
    •  Endbits, overlay
    •  Front lift group, mounting
    •  Front lift group
    •  Moldboard: 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
    •  Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in)
    •  Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in)
    •  Push plate
    •  Ripper, mounting
    •  Ripper, rear
    •  Ripper tooth
    •  Scarifier, front

360° Exterior View