At Caterpillar, we’re always thinking of new ways to meet our customers’ needs. It’s how we constantly improve on the electric rope shovel and provide the extreme levels of productivity and cost-effectiveness that our global customers demand.
These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2)
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
Main Structures
Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - Total Effective Bearing Area (1)
32 m²
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
10.6 m
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
400 kPa
Ground Bearing Pressure - Total Effective Bearing Area (2)
41 m²
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
10 m
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Ground Bearing Pressure - 274.3 cm (108 in) Treads
316 kPa
Upper Works Overall Width - Including Standard Walkways
13.5 m
Planetary Propel
Dual-motor independent drive.
Optimal Working Ranges*
Radius of Level Floor
16 m
Dumping Height - With Clearance to Open Dipper Door
9.4 m
Cutting Height - Maximum
14.9 m
Note (2)
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
Note (1)
Optimal working ranges based on loading a Cat® 793F truck.
Revolving Frame Tail Swing Radius
9.3 m
Cutting Radius - Maximum
22.8 m
Lube System
Components (1)
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Type
Automatic, single-line system for open gear lubricant and grease.
Components (2)
External fastfill from lower level.
Electrical
Power Requirements - 60 Hz
7,200V
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - Peak power
3330 kW
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
Power Requirements - Average Power Demand
832-1165 kW (1,116-1,562 hp)
Drive
IGBT Acutrol drive system.
Note
Other voltage options available to suit customer requirements.
Front End
Rope Data - Boom Suspension - Diameter
83 mm
Rope Data - Dipper Trip - Diameter
16 mm
Rope Data - Hoist - No.
2
Rope Data - Note
High impact ropes available as an option.
Rope Data - Crowd - Diameter
64 mm
Rope Data - Retract - Diameter
64 mm
Rope Data - Crowd - No.
1
Rope Data - Hoist - Diameter
70 mm
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Boom Suspension - No.
4
Rope Data - Retract - No.
1
Crowd
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Dipper Trip - No.
1
"Call Back Option available only for UAE, Bahrain, Kuwait, Oman and Qatar."
Have a Question?
Welcome!
Signup to Al-Bahar Monthly newsletter and stay connected!
We respect your privacy and will never share or sell your information.
