At Caterpillar, we’re always thinking of new ways to meet our customers’ needs. It’s how we constantly improve on the electric rope shovel and provide the extreme levels of productivity and cost-effectiveness that our global customers demand.
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data: Hoist – No.
Rope Data: Hoist – Diameter
Rope Data: Crowd – No.
Rope Data: Crowd – Diameter
Rope Data: Retract – No.
Rope Data: Retract – Diameter
Rope Data: Boom susp. – No.
Rope Data: Boom susp. – Diameter
Rope Data: Dipper trip – No.
Rope Data: Dipper trip – Diameter
High impact ropes available as an option
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
IGBT Acutrol drive system.
Power Requirements – Voltage
3 phase, 50/60 Hz, 7,200V
Power Requirements – 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
Power Requirements – 60 Hz
Power Requirements – Average power demand
777-1087 kW (1,042-1,458 hp)
Power Requirements – Peak power
Other voltages available to suit customer requirements.
Upper works overall width (including standard walkways)
Crawler Dimensions – Overall width 213.4 cm (84 in) treads, standard
Crawler Dimensions – Overall width 274.3 cm (108 in) treads
Ground Bearing Pressure – Total effective bearing area
Ground Bearing Pressure – 213.4 cm treads (84 in), standard
Ground Bearing Pressure – 274.3 cm treads (108 in)
Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Dual-motor independent drive.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Optimal Working Ranges*
Dumping height – with clearance to open dipper door
Cutting height (maximum)
Cutting radius (maximum)
Radius of level floor
Revolving frame tail swing radius
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Automatic, single-line system for open gear lubricant and grease.