Extend-A-Mat 10-20B Screed
Low profile, ease of operation, high-efficiency screed plate heating systems, low-maintenance screed plates and superior serviceability are combined to provide a superior screed, the Extend-A-Mat 10-20B.
The Extend-A-Mat 10-20B offers a diesel screed plate heating system or an electric screed plate heating system. Both systems are highly efficient and provide fast warm-up.
|Maximum Paving Width||7.37 m|
|Minimum Paving Width||2.44 m|
|Standard Paving Width||3.05 m|
Screed PlatesScreed plates deliver a high-quality mat and a long service life.
Abrasion Resistant Alloy SteelScreed plates are constructed of abrasion resistant alloy steel that resists damage and provides an enhanced service life.
Precompaction And Material FlowCurved nose bar design provides precompaction and enhances material flow under the screed.
Nose Bar And Screed Plate ReplacementsNose bar and screed plate replacement are simplified with tapped holes and studs.
Heavy-Duty Mounting PlatformHeavy-duty mounting platforms provide rigid support for screed plates, which simplifies leveling.
Screed Plate LevelingSaves time with the trailing edge screed plate leveling system.
Quick And ConvenientScreed plate leveling is quick and convenient with the trailing edge adjusting system.
Trailing Edge Adjusting SystemThe trailing edge adjusting system saves time when installing new screed plates or when adjusting existing plates.
Extra Corrosion ResistanceThe trailing edge adjusting bolt system hardware is plated to provide extra corrosion resistance.
End GatesEasy-to-adjust end gates ensure a good joint with the adjacent mat.
Spring-Loaded End GatesSpring-loaded end gates create a downward force that causes the gates to follow the profile of the surface being paved, assuring a good joint with the adjacent mat.
False-Wall DesignFalse-wall design reduces mix contact with the sliding portion of the gate, providing easy gate adjustments.
Bolt-On DesignBolt-on design allows easy end gate installation and removal.
Replaceable Wear StripReplaceable wear strip enhances end gate service life.
Full-Length End GateFull-length end gate contains material, providing an optimal longitudinal joint.
Triangular Extender ConfigurationTriangular configuration of the extender supports provide torsional resistance and rigidity.
Support Provided For Each ExtenderTwo extendable support tubes and a third frame member provide support for each extender.
Visual Graduated ScalesVisual graduated scales indicate the distance that the extenders move in or out.
Hydraulically Driven VibratorsHydraulically driven vibrators located on the extenders are synchronized with the main screed to match frequency and amplitude.
Vertical Height AdjustmentVertical height adjustment allows the extenders to match the main screed height.
Adjustable PlateAn adjustable plate on the inboard side of each extender provides a tight joint in order to prevent asphalt from bleeding between the main screed and the extender.
Diesel Screed Plate Heating SystemHighly efficient burner system provides fast, even screed plate heating.
Four Diesel Fuel BurnersFour diesel fuel burners, two on the main screed and one on each extender, provide fast screed plate heating.
Even Heat DistributionBurners on main screed and extenders are mounted on a replaceable, baffled combustion chamber with flame deflectors that direct heat to screed plates, providing even heat distribution.
Full-Length InsulationFull-length insulation over the combustion chamber enhances heating efficiency and minimizes heat transfer to the screed frame.
Glow Plug IgnitionGlow plug ignition is actuated from the main screed control boxes.
Built-In TimerA built-in timer allows 15 minutes of screed plate heating, preventing overheating of the plates.
Electric Screed Plate Heating SystemHighly efficient electric heating system provides warm-up time in 30 minutes or less.
Heating ElementsHeating elements provide a warm-up time to 122° C (220° F) in 30 minutes or less when ambient temperatures are 22° C (40° F) and above.
Multi-Zone Heating ElementMulti-zone heating element configuration provides even heat distribution.
Screed Control PanelScreed control panel includes three temperature settings that are able to accommodate normal hot mix asphalt and extended temperature based mixes.
Regulated Screed Plate TemperatureController automatically regulates the screed plate temperature to the selected setting.
Minimal Operator TrainingOn-board diagnostics and screed control panel require minimal operator training.
Generator System (Tractor Option)Continuous-duty integrated design ensures peak performance and high reliability.
Industrial, Single-Phase GeneratorIndustrial, single-phase generator operates at 1800 rpm, includes GFCI breaker protection and provides low sound levels.
Single Control SwitchSingle control switch located on the tractor’s operating console activates the generator.
Full PowerFull power is provided to the electric screed and the optional auxiliary power panel while the engine is operating at idle speed.
Dual BearingsDual bearings with seals extend service life and internal electronic voltage regulation provides consistent power.
Auxiliary Power Panel (Tractor Option)The auxiliary power panel provides efficient power for night-time lighting and other job-site power needs.
Auxiliary Power PanelOptional auxiliary power panel provides 8 kW of power and includes four 120-volt and two 240-volt receptacles.
Ground Fault Circuit InterruptionThe 20-amp receptacles are circuit breaker protected with ground fault circuit interruption (GFCI).
Auxiliary Power Panel DoorAuxiliary power panel door can remain closed while power cords are attached to the receptacles providing protection.
ServiceabilityExtend-A Mat screeds are easy and fast to service.
Easy Service And MaintenanceThis screed has been designed for easy service and maintenance with special emphasis given to component access.
Hydraulic Hoses And Electrical WiringHydraulic hoses and electrical wiring harnesses are cleanly routed and clamped to reduce wear and provide easy service.
Diesel Fuel Burner LinesDiesel fuel burner lines are equipped with a quick-disconnect coupling that simplifies switching from the screed plate heating system to the wash-down system.
Remote-Mounted FittingsRemote-mounted fittings for vibrator bearings provide simplified lubrication access.
Hydraulic LeaksO-Ring face seal fittings and couplings provide maximum protection against hydraulic leaks.
Nylon Sleeve ProtectionExposed hoses have nylon sleeve protection to reduce abrasion.
Vibrator System Hydraulic LinesVibrator system hydraulic lines are constructed of steel tubing, providing durability and resistance to damage.
High-Quality ComponentsIntegrity of the electrical system is ensured with the use of high-quality components.
Electrical StandardsThe Caterpillar electrical standards, developed to enhance reliability and durability, feature soldered, molded, numbered and color-coded wires. Nylon-braided wrap protects the electrical wires.
Electrical SchematicsElectrical schematics detailing wire numbers, wire colors and component part numbers are located in the service manual.
- Screed Plate Heating
- Screed Plates
- Extender Configuration
- Extender Height
- Extender Slope
- Thickness Screws
- End Gates
- Vibrator System
- Screed Controls
- Electrical System
- Hydraulic System
- Generator (Tractor Option)
- Auxiliary Power Panel (Tractor Option)
- Thickness Control Screws
- Power Controls for Slope, Crown, and Height
- Bevel End Plates
- Wide Plates
- Berm Extensions
- Cutoff Shoe Package
- Electric Screed Heat
- Screed Extensions
- Paving Packages