• Banner
Offshore Generator Sets

Oil and gas producers have relied on Caterpillar since the industry's earliest days. For 60 years, we've powered the petroleum business on land. Now we go with it onto the ocean, hundred of miles out, thousands of feet down.

C175-16 Offshore Generator Set

Caterpillar can help you navigate the challenges in the oil and gas industry, including global competition, tightening emission standards, and high productivity demands. The Cat® C175 delivers more reliable power in less space than any other generator set in its class. As efficient as it is powerful, this compact package will make a huge impact on your rig’s performance. The proven success of the 3500 series engines forms the foundation of the Cat C175 diesel engine. Low owning and operating costs, high endurance components, and outstanding serviceability add to the innovations. The Cat Alarm and Protection System integrates with dual ADEM A4 engine control modules to provide redundant engine control, generator set protection, and a simple operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C175-16 offshore generator set. Ratings: 1833-2660 ekW (2619-3325 kVA) @ 50/60 Hz (1500/1200/1800 rpm). U.S. EPA Marine Tier 2 certified and IMO Tier II emissions compliant.

  • Specification Summary

  • Minimum Rating 1833.0 ekW
  • Maximum Rating 2660.0 ekW
  • Emissions Available in IMO Tier II/ EPA Marine Tier 2 configurations
  • Aspiration Turbocharged/2-stage aftercooled
  • Specification Sheet

    Download

Product Details

Engine Specifications

Minimum Rating 1833.0 ekW
Maximum Rating 2660.0 ekW
Emissions Available in IMO Tier II/ EPA Marine Tier 2 configurations
Aspiration Turbocharged/2-stage aftercooled
Fuel System Common Rail/EUI™
Engine Control Dual ADEM™ A4
Generator Set Control MPD 3.0 / Cat® Alarm and Protection System
Oil Change Interval 1000.0 hr
Weight 24312.0 kg
Stroke 220.0 mm
Bore 175.0 mm
Displacement 85.0 L

Dimensions

Length 50 Hz - 6782 mm (267 in) / 60 Hz - 6742 mm (265 in)
Height 50 Hz - 2928 (115 in) / 60 Hz - 2916 mm ( 115 in)
Width 50 Hz - 2413 mm (95 in) / 60 Hz - 2125 mm (84 in)

Capacity for Liquids

Cooling System (Engine) 77.0 L
Lube Oil System (Refill) 946.0 L
  • Air Inlet System
    •  Dual turbochargers
    •  Corrosion-resistant aftercooler core
    •  Air cleaners — single or dual element
  • Exhaust System
    •  Dry exhaust manifolds with thermo-laminated heat shields
    •  Dual turbochargers with water-cooled bearings and thermo-laminated heat shields
    •  Vertical exhaust outlet
    •  Flange and exhaust expanders
  • Cooling System
    •  Separate-circuit-aftercooler (SCAC) and jacket water (JW) circuit cooling system
    •  Gear-driven centrifugal pumps, one for each circuit
    •  SCAC electronic thermostat, outlet-controlled with aftercooler inlet temperature sensing
    •  JW electronic thermostat, outlet-controlled with outlet temperature sensing
    •  Engine oil cooler in JW circuit
  • Fuel System
    •  Cat common rail high-pressure fuel system with electronically controlled unit injectors
    •  Duplex primary fuel filter with water separator
    •  Duplex secondary/tertiary fuel filters
    •  Electric fuel priming pump
    •  Gear-driven low pressure transfer pump
    •  Gear-driven high pressure transfer pump
    •  Double-walled high pressure fuel lines
    •  Fuel pressure, temperature, and leak detection sensors
  • Lubrication System
    •  Engine-driven, gear-type oil pump
    •  Integral lube oil cooler
    •  Front-mounted oil drain lines and valve
    •  Oil sampling valve
    •  Filler and dipstick
    •  Four-canister simplex oil filter
    •  Prelube pump — electric, air, or custom
    •  Fumes disposal with crankcase breathers
    •  Crankcase explosion relief valves
  • Engine Control and Protection
    •  Dual ADEM A4 engine control unit (ECU) for redundancy
    •  Software monitors engine parameters and performs alarm, derate, and shutdown functions
    •  Rigid wiring harness
    •  Marine Power Display 3.0 (MPD 3.0)
  • Mounting
    •  Inner-outer base with vibration isolators
  • Inner-outer base with vibration isolators
    • Generator
      •  Kato brushless permanent magnet 6P6.6-3200 HR
      •  2-bearing, close-coupled arrangement
      •  60 Hz, 600V, 0.7 PF
      •  UL/CSA listed, IP23
    • Flywheel and Coupling
      •  Flywheel housing, SAE No. 00
      •  Flywheel, SAE No. 00
      •  ABS certified, non-certified, or custom-coupling and coupling mounting
      •  Free-standing or close-coupled generator set arrangements
    • Starting System
      •  Turbine air starter or
      •  Dual electric starting motors or
      •  Air and electric starting motors (redundant)
    • General
      •  Power distribution box — 24V or custom
      •  20A battery charger
      •  Cat yellow paint
      •  Offshore oil field sub-base
      •  Integral spring isolators with limit stop
      •  Lift provisions on base
      •  Oil drain extension
      •  Engine length drip pan with drain
      •  Torsional dampened driveline couplings
    • Power distribution box — 24V or custom
      • 20A battery charger
        • Cat yellow paint
          • Offshore oil field sub-base
            • Integral spring isolators with limit stop
              • Lift provisions on base
                • Oil drain extension
                  • Engine length drip pan with drain
                    • Torsional dampened driveline couplings
                      • Air Inlet System
                        •  Air cleaner service indicator
                      • Air cleaner service indicator
                        • Cooling System
                          •  9 kW, 240V, 60 hz jacket water heater
                          •  Custom jacket water heater
                        • Fuel System
                          •  Four canister duplex oil filter
                        • Engine Control and Protection
                          •  Cat Alarm and Protection System
                          •  Communication module PL1000T/E
                          •  Direct-rack control
                          •  Thermocouples
                          •  Metal particle detector
                          •  SOLAS spray shielding
                        • Mounting
                          •  Custom I-beam base with vibration isolators
                        • Custom I-beam base with vibration isolators
                          • Generator
                            •  Custom generator
                          • General
                            •  TVA report
                            •  Special tests
                            •  Project-specific installation drawings
                            •  P&ID-electrical drawings
                            •  Spare parts kit
                            •  Barring group
                            •  Engine lifting group
                            •  Custom generators and radiators
                          • TVA report
                            • Special tests
                              • Project-specific installation drawings
                                • P&ID-electrical drawings
                                  • Spare parts kit
                                    • Barring group
                                      • Engine lifting group
                                        • Custom generators and radiators
                                          Built for it