C15 ACERT Land Mechanical Drilling Engine
Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C15 ACERT™ Industrial Diesel Engine. Ratings: 328-444 bkW (440-595 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards.
Minimum Rating328.0 bkW Maximum Rating444.0 bkW EmissionsEPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA Rated Speed1800.0 RPM Bore137.2 mm
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Governor and Protection
Engine Weight, net dry
Oil Change Interval
Rotation (from flywheel end)
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
136 (SAE 0), 113 (SAE 1)
Capacity for Liquids
Minimum Cooling System (engine only)
Air Inlet System Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and TEL Electronic diagnostics and fault logging Engine monitoring and protection system (speed, temperature, pressure) J1939 Broadcast (diagnostic, engine status, and control) Cooling System Thermostats and housing — outlet vertical Jacket water pump — gear-driven, centrifugal, RH RH front water pump inlet All plugs/fittings are STOR for lines gp water Exhaust System Exhaust manifold — dry Front turbo exhaust Full marmon connection, maximum load 10 kg for direct connection to turbo Flywheels and Flywheel Housings See Mandatory Options Fuel System MEUI system Fuel filter, secondary, mid-mount (LH 2 micron high performance) Fuel transfer pump, LH front Fuel priming pump, LH mid-mount Fuel sample valve, mounted on fuel filter base Lube System Crankcase breather — rear valve cover Oil cooler — RH Oil filter — RH Oil pan — front sump Oil filler — LH front Oil dipstick — LH front Oil pump Oil valve sampling — on oil filter base Crankcase breather — rear valve cover Oil cooler — RH Oil filter — RH Oil pan — front sump Oil filler — LH front Oil dipstick — LH front Oil pump Oil valve sampling — on oil filter base Mounting System Front support (shipping only) Power Take-Offs Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width Hydraulic pump drive, SAE A, 11 tooth Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width Hydraulic pump drive, SAE A, 11 tooth General Vibration damper Paint — Cat yellow Lifting eyes Automatic variable timing, electronic Electronic installation kit 70-pin connector (connectors, pins, sockets) Literature group owner and operator Vibration damper Paint — Cat yellow Lifting eyes Automatic variable timing, electronic Electronic installation kit 70-pin connector (connectors, pins, sockets) Literature group owner and operator Mandatory Options Throttle position sensor Exhaust system — front or rear Flywheel housing or rear PTO Primary filter/water separator Throttle position sensor Exhaust system — front or rear Flywheel housing or rear PTO Primary filter/water separator
Transmission Arrangement Transmission cooler Tool set Transmission cooler Tool set Air Compressor Air chambers Air compressor governor Air Inlet System Air cleaners Precleaners Air lines Air inlet gasket Charging System Charging alternators Alternator mountings Alternator wiring Circuit breaker mountings Alternator belt guard Cooling System Radiator — installed Radiator — ship loose Fan drive f/u/w Caterpillar installed radiator Fan drives for customer-supplied radiators Fan height instructions Vee belts for customer-supplied radiators Aftercooler lines f/u/w Caterpillar installed radiator Rear-facing exhaust Aftercooler lines Suction fan adapters — attaches fan to fan pulley Blower fan adapter — attaches fan to fan pulley Blower fan Suction fan Fan belt tightener Coolant level sensor Dry charge coolant conditioners Dry charge coolant conditioner element Exhaust System Turbo exhaust connection Flexible fitting Elbows Flanges Dry elbow
39 Similar Products Available in Used
PM Kit for the model you are seeing
Signup to Al-Bahar Monthly newsletter and stay connected!
We respect your privacy and will never share or sell your information.