• Banner
Industrial Diesel Power Units - Lesser Regulated & Non-Regulated

Cat® industrial engines are ready for your application. These engines deliver the unsurpassed reliability, durability, fuel efficiency, and low cost of ownership you have come to expect from Caterpillar. And our world-class product support will never let you down. All this adds up to a powerful advantage for you. Every Cat industrial diesel and gas engine comes with 75 years of engine experience. Our world-class product line of high-speed and medium-speed industrial engines in a wide range of applications offer power solutions for the most demanding installations and the harshest environments. With power options from 8.2 to 6,100 bkW (11 to 8,180 bhp), Cat industrial diesel and gas engines offer the widest power range in the industry.

Cat® C13 ACERT™ Industrial Power Unit

The Cat® C13 ACERT™ Industrial Power Unit is offered in ratings ranging from 287-328 bkW (385-440 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent emission standards. Ratings: 310-328 bkW (415-440 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 2 equivalent andEU Stage II equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

  • Specification Summary

  • Minimum Rating 287.0 bkW
  • Maximum Rating 328.0 bkW
  • Frequency 1800-2100
  • Emissions China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent

Product Details

Power Rating

Minimum Rating 287.0 bkW
Maximum Rating 328.0 bkW
Frequency 1800-2100

Emission Standards

Emissions China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent

General

Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
Bore 130 mm (5.1 in)
Stroke 157 mm (6.2 in)
Displacement 12.5 L (763 in³)
Aspiration Turbocharged Aftercooled (TA)
Compression Ratio 17:1
Combustion System Direct Injection
Rotation (from flywheel end) Counterclockwise
Cooling System Capacity 14.2 L (15 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length 1295 mm (50.9 in)
Width 1186 mm (46.7 in)
Height 1054 mm (41.5 in)
Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 1692 kg (3730 lb)
  • Air Inlet System
    •  Turbocharged
    •  Air-to-Air Aftercooled
  • Turbocharged
    • Air-to-Air Aftercooled
      • Control System
        •  Electronic governing, PTO speed control
        •  Programmable ratings
        •  Automatic altitude compensation
        •  Power compensation for fuel temperature
        •  Programmable low and high idle and total engine limit
        •  Electronic diagnostics and fault logging
        •  Engine monitoring system SAE J1939 broadcast and control
        •  ADEM™ A4 Electronic Control Unit (ECU)
      • Cooling System
        •  Thermostats and housing, vertical outlet
        •  Jacket water pump, centrifugal
        •  Water pump, inlet
      • Thermostats and housing, vertical outlet
        • Jacket water pump, centrifugal
          • Water pump, inlet
            • Exhaust System
              •  Exhaust manifold, dry
              •  Optional exhaust outlet
            • Flywheels and Flywheel Housing
              •  SAE No. 1 flywheel housing
            • Fuel System
              •  MEUI injection
              •  Fuel filter, secondary (2 micron)
              •  ACERT™ Technology
              •  Fuel transfer pump
              •  Fuel priming pump
            • MEUI injection
              • Fuel filter, secondary (2 micron)
                • ACERT™ Technology
                  • Fuel transfer pump
                    • Fuel priming pump
                      • Lube System
                        •  Crankcase breather
                        •  Oil cooler
                        •  Oil filler
                        •  Lube oil filter
                        •  Front sump oil pan
                        •  Oil dipstick
                        •  Gear driven oil pump
                      • General
                        •  Vibration damper
                        •  Lifting eyes
                        •  Cold start capability to -20° C (-4° F)
                        •  Paint: Caterpillar yellow, with optional colors available at request
                      • Vibration damper
                        • Lifting eyes
                          • Cold start capability to -20° C (-4° F)
                            • Paint: Caterpillar yellow, with optional colors available at request
                              Built for it