Industrial Diesel Engines - Lesser Regulated & Non-Regulated

Cat® industrial engines are ready for your application. These engines deliver the unsurpassed reliability, durability, fuel efficiency, and low cost of ownership you have come to expect from Caterpillar. And our world-class product support will never let you down. All this adds up to a powerful advantage for you. Every Cat industrial diesel and gas engine comes with 75 years of engine experience. Our world-class product line of high-speed and medium-speed industrial engines in a wide range of applications offer power solutions for the most demanding installations and the harshest environments. With power options from 8.2 to 6,100 bkW (11 to 8,180 bhp), Cat industrial diesel and gas engines offer the widest power range in the industry.

Text

Cat^® C0.7 Diesel Engine

The C0.7 Industrial Diesel Engine is offered in ratings ranging from 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm. These ratings meet EPA Tier 4 emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

Specification Summary
Minimum Power 12.2 bkW
Maximum Power 15.3 bkW
Rated Speed 2800-3600 rpm
Emissions U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Enter Your Details
Name: *

Email: *

Phone: *

Country: *

Would you like to receive a call for further information?

Yes

No
Get a Quote - New
- Get a Quote - Rental
- Get a Quote - Used

Power Rating

Minimum Power	12.2 bkW
Maximum Power	15.3 bkW
Rated Speed	2800-3600 rpm

Emission Standards

Emissions	U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.

General

Engine Configuration	Inline 3, 4-Stroke-Cycle Diesel
Bore	67 mm (2.64 in)
Stroke	72 mm (2.83 in)
Aspiration	Naturally Aspirated (NA)
Displacement	.762 L (46.5 in³)
Compression Ratio	23.5:1
Combustion System	Indirect Injection
Rotation from Flywheel End	Counterclockwise
Lube System - Refill	2.35-3.05 L (2.48-3.22 qt)

Engine Dimensions - Approximate

Height	528 mm (20.8 in)
Length	480 mm (18.9 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	71 kg (156.5 lb)
Width	371 mm (14.6 in)

Air Inlet
- Inlet manifold with choice of inlets.
Inlet manifold with choice of inlets.
Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
Alternator 12 volt 14 amp
Starter motor 12 volt
Glow plug starting aid
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
SAE No. 6 1/2 flywheel
Choice of SAE No. 5 or standard backplate flywheel housing
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
Paint: Caterpillar yellow, with optional colors available at request